Love the gun but way to much power for my backyard range. Is there an easy way to lower the power to about 900 fps in .177 8.0 grain
You could install an adjustable regulator and set the power level lower.
how much it weighs ????
The 2018 Hatsan catalog now shows this rifle with an adjustable comb. Is this a older model?
This is the current production model, the adjustable cheek piece version has yet to be released
is there any o rings at the end of the barrle
Not quite sure what you mean? Can you explain?
The At44-10 QE picture on Hatsan website shows stock with a pistol grip and adjustable comb. Is that what is sold by PA, or is PA's version different from what is on Hatsan website?
Sounds like you're talking about the AT44 QE Tactical. Which can be found here: Hatsan AT44S10 Tact PCP QE...
what scopes mounts are should I used? Thank you
I used the 30mm two piece mounts on my QE long with six screws in each one made by Hawk. There are many choices .
I am wondering if anyone shoots this rifle Left Hand?
I have it in 22 caliber and i shoot left handed ( it is ambidextrous ).
It states that it generates up to 46 lbs of energy in .25, but when you click on .25 it states that it is 34. Which one is correct?
Not sure where you're seeing that. I am seeing 46 everywhere. Maybe PA updated it.
Any idea what size pellet they test with, maybe 15gr? The .22 spec says 970fps but only 31fpe. I can get 31fpe with 810fps on my .22 Marauder with 21gr lead. I need more fpe.
Enter the fps and the fps in the calculator provided by PA. It will tell you the pellet weight.
I believe 14 grain.
What is the Max effective kill range of medium sized game for all calibers? .177 , .22 , and .25?
Would the .25 version kill iguanas?
With proper shot placement, it should be more than able to do the job
I'm sure it discusses somewhere in the description of the Hatsan AT44-10. But what type of air does this take to fill the PCP tank and a Venturi Carbon Fiber tank? Will nitrogen work? What's best?
breathing air or nitrogen would be fine.
Can the side lever be switched from side to side for a lefty?
How many dB is produced in the .25 cal model? I already know that for .22 it is around 64 db.
As calibers increase they do get louder but probably not by to much?
Can the rifles air cylinder be removed and filled separate from the rifle.
Yes it can.
Can the Hatsan AT44 Air Cylinder be filled from a hand pump, when it's completely empty ?
Yes it can .
WY the magazine in my AT4410 QE is not working? is not even 4 weeks and less the 20 shots
Did you contact hatsan.com ? Can it still be returned?
I have the Benjamin marauder and I think it's much better and easy too fill and everything
I like Beyonce, my brother likes Hallow Berry! I'd be happy with either! Btw I have the at44s-10 and it's a sweet little honey! Looking forward to my first Benjamin
Thats great its good to be satified with your choice . I have the QE Long in 22 caliber and i like all the features it has , so I'm satisfied with my choice . Thats what makes us all different.
WY is too hard to fill
I fill my QE Long with no problem a slight bit of silicone grease helps the O-rings stay pliable , i have the Hill pump. I do agree foster fill is a whole lot easier , it should be the standard on all airguns.
Does it use the same tank as the AT44PA? Tank: 17.25 inches, gage-end to aft edge of brass ring. I have a extra tank for my PA and would like to be able to interchange.
You are correct they use the same one.
Which hand pump will fit this gun? All of them?
Yes all of them that are high pressure pumps.
Hatsan at4410 versus Benjamn marauder, which one would you buy
Had them both, Mauauder fill gauge failed in the first hour!! AT44-10 long is a hard hitter, well made. Go with the Hatsan!
The Hatsan . Do the research and decide. I keep reading about certain issues with barrels etc.
Best pellet for this monster I tried the jsb 18.13 but it don't like them.
For me, H&N Baracuda Match 21.14 gr worked very well.
Keep looking til you find a pellet you like.
With this rifle can you swap out the empty air reservoir to for a full one while out in the field?
could you fit a lothar walther barrel in this?
Why ? Hatsan barrels just as accurate (german steel ).
Can i shoot round balls with this and will they preform well?
sadly you can nit accurately shoot round balls unless they are .45 cal and above. The equal air resistance can very easily be unbalanced by outside forces. From expirence, if you are looking for consistently well performing pellets go with domed.
will a bt 65 air cylinder fit a at44 airrifle
The 44 valve is different , won't work.
In .22 caliber, will the magazine fit predator polymags, or better yet the predator metalmags?
To be clear the shorts are god and the longs are not
They have a polymag short out now that will work in the mag
No, They are too long. <-- Correct English
No, their too long.
What do I need to be able to hook this up to a benjamin pump
Click on the PCP Hookup tab on the right. Looks like you only need this adapter.
My QE long just arrived and its .177... I am shooting with RWS Superdome 8.3 gr. I wanted it as a backyard shooter and when shooting, there is a loud crack (sounds like a bull whip)which I assume is the pellet coming out way to fast... What can I do to silence it? What gr pellet would be most suitable... Ive only taken 2 shots before the neighbors came out to see what the noise was...
Mine is sending Baracuda hunter 10.34 grain pellets out at 1012 fps. Much lighter than that will break the sound barrier.
realistically you will need 14 grain pellets at the factory setting. you will need 12 graing pellets at a 80-85% power setting
I contacted Hatsan. They informed me the my 8.3 gr pellets are travelling at the speed of sound, so I need to use 9gr pellers of more, with a suggestion to use the Diablo Exact heavy... I hope this helps others :)
Cracked a deer! Wow! Does anyone know whether it comes with a sling that is pictured?
Yes it does.
What is the biggest animal can you take.
Were you trying to hit it in the eye and just hit a bit high?
@Anthony. I do not doubt it. I prefer hunting rabbit with a pellet gun, and always go for head shots. We practice shooting sometimes in the dark. mini mag like mounted on barrel. shooting small pistol primers at 35 ft away. I have confidence I can drop about anything with a pellet gun.
not legal to hunt deer with this in most states
Val it is "doable". I did it. This rifle is very powerful and often underestimated. Right above the eye socket is a weak spot in a deer skull and that's exactly where I nailed em. No luck needed. If it was any further than 20 meters, I would not have taken the shot as the pellet will have questionable energy to penetrate even the weak part of a deer skull.
Eric, this does not sound doable with this rifle or you got incredibly lucky with your shot. Even at 20 yards you need to really be a good shot to do it.
I just cracked a deer in the dome with this bad boy and it dropped like a ton of bricks. 20 meters. Jsb jumbo heavy 18.13 .22 cal.