Can the kral punch breaker be a left handed gun
Is this gun capable of humanly disposing of a raccoon in .22? .25?
Yes; Using a heavy 22 cal pellet. or the med 25 cal will do the job.
Do the polymer stocks come with adj buttpad (ie. LOP) as shown on the kral homepage? These appear to be the new design. Thanx
My gun cabinet is 12 inches deep. Does anyone know how much depth I would need if this had a scope on it?
With the scope I have on mine, you'll need every bit of the 12" depth. If your scope is anything like mine, 12" won't be deep enough.
Can this gun be shipped to Canada?
Can a regulator be put on this model? is it offered? How much?
I believe there is one available from Robert Lane in the UK, PA does not sell it.
My understanding there is a MkIII version out with a new Valve. what version is PA shipping?
These bullpups just came in, so these should be the latest and greatest from Kral
.177 shot count and .25? Is it regulated ? ThAnks
Not regulated. .177 about 40 good shots per fill, .25 does around 35.
I'm very interested in this gun, but I'm wondering if they've resolved the valve stem issue? I heard the steel is a bit too soft and hadn't been properly heat treated.
I've heard of far less issues recently, so in all likelihood, this issue has been resolved.
I have a slow leak that just recently started with my puncher breaker. The gun will go from full charge down to none in a few days of storage time. Anyone have suggestions what might be the cause?
The most common place for a leak is the burst disk on top of air cylinder it is made of brass .
Have you found a location where the air is coming from? My first thought is the valve.
Is the air cylinder removable ?
Are you taking preorders for the MkII model yet?
Is it possible to mount a sling on these? I bought one of these badboys in .25 and would like a sling for when im out hunting but dont know which will fit
Does the 21" barrel length include the end of the stock or just the barrel itself?
Just the barrel
Is the 28" barrel length just the barrel or does it include the end of the stock?
Barrel is 21"
A youtube video shows that this gun comes with a screw on compensator. Does it?
Not in the US
Will the magazine on the 22 handle the eun gin 28grain domed pellet...and it was asked if the polymags could be used,and the answer was "yes"....was that the standard polymags,or the shorts? Thank you
Yes it will
Is this bullpup (Kral puncher breaker) quieter in .22 vs .25 cal? how does the caliber effect noise level? Also, Will my Benjamin Marauder pump work with this rifle? Thanks
Not a big difference in noise between the two calibers. The .25 may be slightly louder, if at all. The pump would work, but you need an adapter for the fill probe that comes with the gun. Air Venturi Male Quick-Disconnect, 1/8"...
Can this airgun be converted to left handed shooting? i.e, cocking lever to other side, cheek piece reversed?
As of right now, no.
hi i like to buy of this can you ship it to phillipines thank you
is there a option to fit a after market silencer to lower report.
Yes. The barrel has a 1/2 thread but you must remove the probe cover and gauge cap
Per the specs: "Half Shrouded barrel for extra-quiet shooting"! Need I say more?
Pyramyd Air does not offer such an option
What is the threading size on the barrel for silencers?
What i am reading from Europe that Hatsan is been making the pcp rifles for Kral arm.
Not true. Kral has been making PCP guns for a few years now.
Are there any type of open sights that can be fitted to this rifle?
Not that I am familiar with
Will .22 Predator Polymags fit in the magazine?
Is the scope rail plastic or aluminum?
Mine is aluminum.
We have checked many of the models we still have in our inventory now and they are all aluminum. The rail does have a casting mark on it in the middle as it is cast aluminum, which does give it a "plastic" appearance, but if you scratch away the anodizing, it should be aluminum underneath.
Just got the .25 today and the scope rail is hard plastic, just like the older Puncher Breaker.
Who makes barrel?