Out of Stock
What is the actual trigger pull force? I've seen conflicting reports from 5.5 pounds to 9 pounds.
Does anyone know the diameter of the air tank?
Does anyone make an aftermarket tank cover ?
I found one on, First-strike.com Just not sure the diameter of the Sig air tank. If its a standard 2 inch we are golden.
Should I put silicone lube on the o rings on the regulator? Thanks
Just a little.
Will it work on nitrogen?
Yes; If restricted to 1100PSI
is the magazine the same as the non-pcp mcx?
Is the flash suppressor removable so a LDC can be equipped?
How do you attach a sling to the rear of this rifle. M Lok in the front that's great but the rear?
On the buttplate there is a sling stud mounting hole.
Does m-loc accessories fit on the shroud of this gun?
Yes just opened mine and it's m Lok side to side and all along the bottom the top is a rail
Is the $299.95 in Canadian funds?
What's the overall length without both the faux flash hider and the tank attatched?
Where is this gun manufactured?
Mine says Japan also. Received 8/9/2020
hu? mark? mine says made in Japan right on the rifle which is awesome since, that's quite a big difference in quality compared to made in china usually.
Made in China, Assembled in the US.
What is the length of pull?
Sig announced this is now shipping, so will everyone who pre-ordered receive their order soon? I am trying to figure out if pyramid air only allows as many people to pre-order as the amount they will be receiving from Sig.
All back orders will be shipped first. We do not know how many guns we will receive in the first shipment.
what material is the frame / receiver of the gun made of
Anyone have an Update. I saw it was in stock on 6/4 then it moved back to 6/22. For those of us who pre-ordered months ago is it possible we will receive this before that 6/22 or is that date going to be when you will begin to get them to ship out?
Back orders will be shipped first.As soon as we get them in stock we will ship them.
Hello Can someone recommend the correct fill hose with connection for the Virtus? I have an older yellow Hill pump that was distributed by BSA. (At least 16 years old) with no quick connect/disconnect. The hose needs to be attached to the pump with a threaded end. I would appreciate the help. Thanks
You need the foster female QD Air Venturi Foster Female Quick-Disconnect... $19.99
boa tarde gostaria de saber se tem como liberar mais potencia atraves do regulador de pressao que diz 1100psi.
No. El regulador y la pistola estn diseados para funcionar a 1100 PSI. Presiones ms altas daarn el arma. No. The regulator and gun are built to operate at 1100 PSI . Higher pressures will damage the gun.
Hello, what is the max joules for this airgun?
thanks a lot
The maximum is 10.4 Joules
It was 4/29 now 6/22. Is this ever going to be In stock?
The 6/22 date is the best in stock date we have. The Covid-19 pandemic has disrupted many production facilities.
Is this going to be the same as they have done with the umarex hammer, kept pushing in stock date back for over 2 years?
Yes it will be, but they are saying it is because of material to make the rifle is hard for the manufacturer to obtain. Nothing to do with shipping.
The Virtus has already been released. The Covid-19 outbreak has delayed the next shipments.
Hello, do you know why is the symbol of an F inscribed in a pentagon? According to German norm, it is to indicate that it is free sale in Germany for having less than 7.5 joules. This is not fulfilled by Virtus, its power is much higher.
The Versions sent to Germany will be set to 7.5 joules. They require the F Hex on the receiver. Higher power versions have it,. It is easier to mark every receiver.
Can an aftermarket moderator be fitted?
Yes, the thread is 1/2-28 with the flash hider removed. I'm using a 1/2-28 female to 1/2-20 male adapter and using a Donnyfl Tatsu moderator.
The "flash hider " is removeable. So yes,a moderator can be threaded on.
One of the customer reviews images shows a custom added stock that covers the tank. Anyone knows what kind of stock that is? Looks like an AR-15/M4 stock but not milspec, something thick/wide enough to house the tank inside. I Definitely would buy.
MTEC ARC-15 - Universal Air Stock
Looks like the "FIRST STRIKE 13CI FLOATING AIR STOCK"
What is the stock number for the spare tanks?
Can it kill a coyote?
No. It is nowhere near powerful enough.
Can this kill a coyote?
No. It is barely a rodent killer. It shoots light waddcutters.
12 fpe , that's it ? smdh
How long can a full tank stay connected to the rifle or do you have to disconnect after every use.
Always leave 800-1000 psi in a pcp airgun.
Are extra air tanks available for this air rifle?
Is it actually semi auto, or is it double action? I
No, Reading BB's blog he just came out and said it's not actual semi auto, but the trigger is so good it seemed almost the same.
The MCX Virtus is semi-auto.
The mock flash suppressor twists off exposing threads. Can anyone tell me the thread specs or how best to determine them?
Can you put a higher pressure regular on this? Say maybe 1200 to 1600 output?
Does the magazine come with more than one pellet belt like the MCX/MPX models?
You get one belt and one magazine. If you buy an extra mag you get 3 belts with it.
i recently bought the MCX, it only came with one pellet belt and one magazine
No. Single belt in single magazine.
Saw the video with Sig Rep. Sig rep indicated these are shipping with a pump, however, asked below and answer was no. Please advise. Can one fill the tank with adapter from a scuba tank? What is cost of hose adapter?
we sell handpumps. The scuba tank fill adapter Air Venturi Scuba Tank Yoke... is $99.99
Has there been an update on the shipment at all?
At this time. This is the best info we have: Estimated in-stock date 02-10-20
Is it made in China?
China made, US. assembled hu? Did this change? mine says made in Japan which imo is a lot better.
Parts are made in China,assembled in the US.
Will I be able to use 90 gram co2 with adapter with this rifle.
No . This is a PCP (compressed air) gun.
dose this rifle comes with the PCP pump.
No. A pump is separate.
The date keeps getting pushed further away? When will I get my preordered rifle before the end of February?
At Shot Show, Sig said they have shipped as of 1.21.20.
We do not have a firm in stock date for the ASP MCX at this time.
I get tanks filled and sometime use the hand pump to fill my pcp, Question is what will I need to be able to use the Benjamin hand pump to fill the tank on this rifle?
The fill connection on the tank is a standard PCP quick disconnect - super easy to fill.
The Benjamin hand pump will hook right to the air tank.
Will separate magazines be available for purchase?
Extra Mags available now and each extra mag comes with 3 belts
yes, at some point
Does the gun come with the hose needed to refill?
will a common shop compressor fill a PCP air tank with the correct fittings?
No. Shop compressors typically on go to 150 PSI. You need 3000 PSI to fill an airgun.
Is the barrel threaded and if so, whats the size?
1/2-28 Thread! Hopefully i can put a can on it and not have the pellets clip it
I replaced the flash hider with a standard AR15 hider, looks great and is a standard 1/2-28 thread.
We have no information at this time.
will there be any restrictions on the ammo size or type?
Mine is shooting pretty well with JSB Jumbo Diabolo 15.89
Yes. We suggest shooting light wadcutters. . 12-15 grains.
# of shots per fill
I am seeing at least 3 or 4 magazines at full power, so well over 100 shots per is a conservative estimate.
We have not seen an example.
How is tank filled? Is one included with the rifle?
Either a hand pump or air compressor capable of 3000psi with a female quick disconnect will work well to connect to the tank. (you do not need to remove tank from gun to fill it.)
You need a 3000 psi compressed air source. The gun comes with a tank.