King Arms Kalashnikov Spring SVD Airsoft Rifle Owner's Manual

King Arms Kalashnikov Spring SVD Airsoft Rifle

Description Gun Type: Spring Mode: Slide cocking HopUp: BAXS - bot Ammo Type: 0.2g+ Capacity: 36 rds Built Material: Full metal Length: 47.75" Warning! User of this Air Cocking Gun must be 18 years of age or older. The shooting range of the plastic BB bullet can reach up to 100 meters, beware at all time. Careless shooting may cause eye or other injuries. Read through this Handling and Instruction Manual carefully before operating this rifle.

King Arms Kalashnikov Spring SVD Airsoft Rifle Component Names King Arms Kalashnikov Spring SVD Airsoft Rifle Loading The Magazine King Arms Kalashnikov Spring SVD Airsoft Rifle Selector Lever & Safety Settings King Arms Kalashnikov Spring SVD Firing the Rifle King Arms Kalashnikov Spring SVD Airsoft Rifle Aiming & Sights Adjustment King Arms Kalashnikov Spring SVD Airsoft Rifle Hop Up Adjustment King Arms Kalashnikov Spring SVD Airsoft Rifle Cleaning The Inner Barrel & Chamber King Arms Kalashnikov Spring SVD Airsoft Rifle Explosive Diagram

King Arms Kalashnikov Spring SVD Airsoft Rifle Component Names

King Arms Kalashnikov Spring SVD Airsoft Rifle Loading The Magazine

Press the magazine catch button towards the magazine to release the locking mechanism and then take the magazine off the rifle.	Load the 36 rounds magazine with 6mm BB bullets. Use BB loader to speed up the process if need. Do not over feed the magazine or the magazine will be damage.	To insert the magazine, put the front end into the slot and then the rear end. A "click" sound will be heard when the magazine is locked completely.
	Warning! Remove the magazine from the rifle and make sure there is no bullet remains in the chamber when the rifle is not in uses. Please beware that the maximum loading capacity for the King Arms Kalashnikov Sniper Rifle Air Cocking Magazine is 36 rounds of 6mm BB. Do not overfeeding the magazine or it will damage the magazine and the rifle. If the magazine is overloaded, it may not be able to insert to the rifle, and might even cause damage to the gun. Do not overfeed the magazine and keep in under the maximum loading capacity, which is 36 rounds (even there might be still room to install more than 36 BBs in the magazine, KA is not recommend user to do so and will not be held responsible for related damages).
back to top

King Arms Kalashnikov Spring SVD Airsoft Rifle Selector Lever & Safety Settings

Safety: Always set the selector lever to the SAFE position when you are not firing the gun or during storage	Fire: The rifle can be fire when the selector is on Fire mode and trigger is pulled.
Warning! Always set the safety selector to "SAFE" position when you are not firing the gun Do not point the rifle at any person or animal at all time, even when the rifle is in "SAFE" mode Do not pull the trigger when the rifle is set to "SAFE" mode or it may damage the rifle
back to top

King Arms Kalashnikov Spring SVD Firing the Rifle

To fire the rifle, first set the selector lever to "Fire" position	Pull the bolt support backward and then release it to complete the bullet loading cycle. A bullet will be shot when the trigger is pulled
Warning! Do not load the rifle until just before you are going to fire it Always keep your finger away from the trigger unless you want to fire the rifle If you cannot push the bolt handle back in position completely when loading the rifle, make sure the selector is pointed on FIRE position If no bullet is shooting out after rifle is loaded and trigger is pulled. Stop shooting and check - If the magazine is empty, reload magazine if needed then install it back to the rifle. - to ensure the loading process is completed. - If there is any bullet is clogged in the inner barrel. Clean the inner barrel with the cleaning rod and apply silicone to the inner barrel.
back to top

King Arms Kalashnikov Spring SVD Airsoft Rifle Aiming & Sights Adjustment

The Kalashnikov Sniper Rifle is equipped with side rail for magnification scope installation. There is a pair of build-in adjustable back-up iron sights on the rifle To aim the rifle, align the front iron sight post through the rear sight hole and form a straight line with the target. User can rotate the front sight post to adjust the iron sight's level. In order to adjust the rear iron sight's level, move the sight leaf slide forward or backward as indicated.	1. Press the sight leaf slide button and move it backward in order to lower the rear sight. 2. Press the sight leaf button and move it forward in order to raise the rear sight.
back to top

King Arms Kalashnikov Spring SVD Airsoft Rifle Hop Up Adjustment

		Turning the hop up excessively can cause bullet clogging. Keep pulling the trigger while bullet being clogged will damage the piston and parts. If bullet clogging occurs, immediately stop firing the gun, turn the hop up to normal position and remove clogging bullets using a cleaning rod. Make sure to return the hop up to normal position when removing clogged bullets. Otherwise, the chamber packing may be damaged. Never use used or dirty bullets. Dirty chamber will result in unstable hop up. Lacking or over spraying of silicone oil will also lead to unstable hop up.
	1. To adjust the hop up, first turn the cover axle pin down and take the top cover off the receiver. 2. Pull the bolt support backward and the hop up adjustment dial will be seen. Assume you are holding the gun, turn the dial anti-clockwise to increase hop up while turn it clockwise to decrease hop up.
back to top

King Arms Kalashnikov Spring SVD Airsoft Rifle Cleaning The Inner Barrel & Chamber

back to top

King Arms Kalashnikov Spring SVD Airsoft Rifle Explosive Diagram

back to top