| Caliber: 6mm |
Overall Length: 9.5
Shot Capacity: 26
Barrel: Smooth bore
Front Sights: Blade and Ramp
Rear Sights: Fixed
Action: Slide cocking
Power Plant: Spring-piston
Body Type: Pistol
Weight: 1.3 lbs
| UTG Model 978 Navy SEAL Warning |
UTG Model 978 Navy SEAL Airsoft Spring Pistol Instructions Manual
Warning! NOT A TOY. FOR AGES 18 YEARS AND UP. MISUSE OR UNSAFE USE MAY CAUSE SEVERE INJURIES. EYE PROTECTION REQUIRED. THE PURCHASER AND THE USER SHOULD READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE GUN AND SHOULD OBEY ALL LAWS CONCERNING THE USE AND OWNERSHIP OF AIRSOFT GUN. DO NOT BRANDISH OR DISPLAY THIS PRODUCT IN PUBLIC - IT MAY CONFUSE PEOPLE AND MAY BE A CRIME. POLICE AND OTHERS MAY THINK IT IS A FIREARM. DO NOT CHANGE THE COLORATION AND MARKINGS TO MAKE IT LOOK MORE LIKE A FIREARM. THIS IS DANGEROUS AND MAY BE A CRIME.
-Always treat the airsoft gun with the same respect and safety precaution as you would with a firearm.
-Airsoft gun must be kept out of reach of minors.
-Use .24 caliber (6mm) plastic BBs only. Strongly recommend using UTG Premium Precision Ground 6mm BB pellets. Low quality BB pellets may clog and damage the rifle. Do not re-use BB's.
-DO NOT MODIFY OR ALTER YOUR AIRSOFT GUN. Attempts to modify the airsoft gun in any way inconsistent with this manual may make it unsafe to use and cause serious injuries.
-Do not store away the airsoft gun loaded. Make sure all BB's are unloaded from the airsoft gun. Always store it in a secure location.
|Never look into the barrel with bare eyes.||Never point the gun to another person within shooting range.||Do not shoot at any target with hard surface within close range. Ricochet pellets may injure yourself.||Do not brandish in public, do not alter the coloration and warnings - such an action is dangerous and may be a crime.|
|back to top|
Before you follow the assembly instruction, make sure to remove the magazine and set the Fire/Safety Selector to the "SAFE" position
-To set the Safety/Fire Selector on the "Safe" position, push the selector vertically all the way up (Fig 2.1)
-To set the Safety/Fire Selector on the "Fire" position, push the selector vertically all the way down (Fig 2.2)
Always use UTG Premium Precision Ground 6mm BB pellets for accuracy and safety. Never re-use pellets.
-Make sure to set the Safety/Fire selector on the "Safe" position.
-Hold and disengage the magazine by pressing the Magazine Release Lever (Fig 3.1)
-Push 6mm pellets into the magazine through the Pellet drop (Fig 3.2)
-Insert the loaded magazine back into the pistol
|Allign and screw the Mock Flash Suppressor into the muzzle (Fig 4.1) |
|Warning! Activating the trigger carelessly is extremely dangerous. Never set the Safety/Fire Selector on the "Fire" position or put your finger on the trigger unless you are ready to shoot at a target. |
-Set Fire/Safety Lever to the "Fire" position (Fig 5.1)
-Pull the slide rearward all the way until it clicks, and push it pack to the original position to complete cocking in one continuous movement.
-Hold the gun firmly and aim the airsoft pistol at your target. Pull the trigger to fire.
-Keep the airsoft pistol in clean conditions.
-Regularly clean the barrel with a soft cleaning rod
|back to top|
|UTG Sports Airsoft Accessories|
|back to top|