- Air Gun Manuals
Technical data CO2 pistol V3. Operation MAIN FIRING LOADING SAFETY RULES ADJUSTING OPERATION HOW TO USE THE SAFETY WARNING
The best way to prevent accidents is to control the way the gun pointing. Never rely on mechanical safety devices. Always keep the pistol pointed in a safe direction. This pistol is fitted with a manual safety catch, which locks the slide. The safety catch is located on the left-rear side of the grip (Fig. A- 1). The safety is "ON" when the lever is in the highest position, covering the red warning indicator. The safety is removed by moving the lever to the lowest position, leaving the red warning indicator visible. Always apply the safety catch when carrying, handling, loading or unloading the pistol.
Do not pull the trigger while applying the safety catch. STORAGE
Airguns should be stored in such a manner as to protect against unauthorized use by children. These products are designed to look, handle and function like pistols. These products should be stored in such a manner to protect against theft and subsequent misuse.
You should never store your Gamo pistol unless it has been cleaned and given a light coat of oil. Always store your Gamo pistol in a clean dry place. It is recommended that you store this product in a protective box or case with appropriate anti-corrosion materials. A local gun shop can advise you on appropriate products available in your area. When storing your pistol, always make sure it is unloaded and the safety in "ON". CLEANING
Make certain the pistol is unloaded and the safety in "ON" before cleaning.
To clean the barrel of the V-3 pistol, activate the safety catch (Fig. A- 1), remove the clip (Fig. C) and use a 4.5 mm or. 177 caliber cleaning rod, rod tip, patches, and bore brush with gun solvent and oil to clean your pistol. Insert the cleaning rod with cleaning attachments from the muzzle. It is helpful if you occasionally apply special GAMO airgun oil to the metal parts of the airgun. MAIN FIRING LOADING SAFETY RULES ADJUSTING OPERATION