See other products by Air Venturi
Ballistic & Conversion Calcs
Output-side filter for high-pressure air compressors using Quick Disconnect fittings. Includes all components necessary for easy installation onto the Air Venturi 4500 PSI Compressor, and can fit any other compressor that uses quick disconnect fittings.
Whether you live in a humid environment or just want to ensure you are getting as much moisture removed from your compressors air as possible, the Air Venturi High Pressure Output Filter is up to the task.
Air Venturi High Pressure Output Filter
Item Code: AV-6033 [PY-A-9097]
See other products by Air Venturi
Ballistic & Conversion Calcs
Weight | 0.25 lbs |
Create an online review
5.0 5.0
4.0 4.0
Nice quality product. Threads are machined well, comes with quick connect fittings installed, has some spare parts included. Delivers very dry air to my guns.
Things I would have changed:Nothing. It's a nice filter.
What others should know:You will need a double male adapter and hose to connect to your airgun/tank. A little cheat to recharge the media and keep the filter working well for cheap is to pull one end off the filter and use a hair dryer to heat up the dessicate for a couple minutes. It does add volume to your fill which will increase your fill times if that is important to you.
4.0 4.0
4.0 4.0
It appears to be well made.
Things I would have changed:A better description of the product is needed. My Air Venturi air filter arrived without and manual or instructions. Those items do not appear to be currently available anywhere online. The description on the Pyramid Air site lacks detail, and I was unable to find any details on the Air Venturi site.
What others should know:In the Q&A section I had asked if this unit could be loaded with molecular sieve beads to dry the air. The answer said it would need screens to keep the beads out of the air lines, and it might be a difficult build. I asked this because, unlike many similar air dryer/filters, there were no photos or descriptions indicating that the Air Venturi air filter actually comes with molecular sieve beads loaded inside it. Imagine my surprise when I opened the end cap to see if I needed to load it with the cylindrical air filters that came with the unit, and several thousand molecular sieve beads spilled all over the place. The cylindrical air filters do not fit snugly in the air filter tube, and will slide right out. The poor fit also means air will pass between the filter elements and the tube, rather than going through the filter elements. I am going to install O-rings on the filter elements to force the air through them.
Got a question or answer?
Log in to participate
I'm thinking of getting this air filter for my compressor. It appears to come with the fiber filters. I want to use desiccant or molecular sieve beads in it. Will that work?
You would have to install internal screens to keep the beads from clogging the air lines. It would be a tricky build.
If this is for the AV 4500 compressor, why is there a female connector on the bottom where you would connect the female connector from the compressor.?
The AV 4500 comes with a male to male fitting, To connect the output hose to the unit. It was a engineering decision.
Only 2 left in stock
Benjamin Recharge HPA Compressor, 4500 PSI, 110VBuy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By Michael
5.0 5.0
4.0 4.0
It is made well and comes with two filter rebuild kits. With It being an Air Venturi branded filter, it doesn't look like an afterthought or add on item to the compressor. With the Central Florida humidity, I do all I can to keep moisture out of my guns and tanks!
Things I would have changed:Add a 4500 PSI hose with two female foster quick disconnects and a male to male foster. This would include all that is needed to be up and running right out of the box.
What others should know:Buy a 4500 PSI hose with two female foster quick disconnects. Get a high pressure 90 degree fitting for the bottom/input on the filter for the compressor hose output connection.