Air Venturi Thumbhole Stock for Reviews

Looking good better fit

Design

* Poorly manufactured - rough edges / cut. Was either laser or air cut - travel speed set too fast. * Finish appears to be flat paint -> thumbhole stock should be anodized for the price.

Concur with pervious reviews... cannot just reverse bottle end plate to fit on AirForce Texan.

I had to take my Texan SS to a machine shop to have a hole drilled in order to insert the stud into the butt plate. Some say you can turn the butt plate around and the stud will then match up to another hole in the butt plate. My problem was the plate was screwed in so tight with the ONE screw, I could not get it out without tearing it up. I will say, it looks good on my gun.

PYRAMYD SHOULD SEND DETAILED MODEL SPECIFIC INSTRUCTIONS WITH EACH PURCHASE. I HAD SEEN REVIEWS LONG BEFORE I GOT MINE THAT SAID THIS BUT NOTHING HAD CHANGED WHEN I RECEIVED MINE.

The Butt Plate is made of HARDENED STEEL so you cannot drill it with an ordinary drill bit.

I got this for my Texan it is dead sexy and makes the rifle feel sturdier

Instructions would be nice but not really required

While it will fit on the Texan it requires a little creativity

Nice Looking addition to my Condor SS

It's little rough around the edges.

Had to do a little gunsmithing as stated in instructions for my gun. Turned my butt plate and clamp over then drilled a hole though butt plate and back side of stock near the bottom of the stock. Tapped the stock with 8/32 and screwed the butt plate to the stock. Maybe not nessesary but I have my sling mount on the butt plate and wanted it to be very solid.

Nice addition to Condor SS. Matte Black finish w/a few burrs which are easily removed. Fit tight into pistol grip with a thumb screw and a sturdy hook, the other end has a 1/4" pin that fits into the butt plate on the tank. The whole installation is very ridged once fastened underneath the tank. Does not wobble at all and ties the Pistol Grip, Tank, and Butt Plate together nicely.

Would like to have all the edges rounded and the whole stock powder coated for this price. I re-sprayed with high quality BBQ Primer after removing the two burrs I found.

Way better looking and way better construction than the Air Force item.

Makes butt stock feel more stable and adds nice look to gun

Easier attaching system. bit pricey

Some of the edges were sharp. Nothing a jewelers file could not fix.

Looks cool.

Make it useful for something other than looks.

I had to modify it to make it fit.

Is as It should have been. Light strong and well machined. As usual I am satisfied with PA products and service. Keep it up. Rich

Although the description says otherwise, the thumbhole stock fit my brand new Condor rifle. Quality-made aluminum piece.

My main complaint with the thumbhole stock is that it makes taking the tank off more difficult. The stock must be completely removed using the thumbscrew in the pistol grip to refill the tank. Include instructions. Not that it is terribly difficult to figure out how to put on but there are some hints that would have been handy.

The thumbhole stock is mostly a cosmetic add, but it does help stabilize & secure the tank in place as well. My rifled weighted 6 oz. more with the stock attached.

Special note. These will work with the new spinloc tank as well.

Looks Cool

Make it easier to attach

It must be detached to refill air tank

very light

none

Looks cool, Its light weight aluminum with a nice matte black finish. Fits perfect. Super easy to move out of way for removal/installation of air tank. Takes about as long as it does to blink twice. Just slid forward enough to clear the little pin hole then to the left or right out of the way, that's it. Not sure why the other poster had an issue...

Nothing

This is mainly a cosmetic upgrade. It looks great. It works with the wokbutt. Note: You have to slightly loosen the bottom screw on grip where the "hook adapter" attaches in order for the adapter to fit inside the grip. Once hooked just snug it back up. this will also prevent it from moving when you put the screw in it.

Its black

The screw should have more to screw into, i wonder if with lots of use it will strip? It really doesnt hold the but plate into postion as well as I hoped. Not as easy to install as guy on vidieo makes it look and must be removed everytime you fill bottle. We need somthing that secures to bottle near butplate to secure the butplate. Butplate is normally just held by the one but screw, this is not secure and the plate has the tendency to rotate. Somebody please make use something that stops this moving of butplate that is simple,light and doesn't require removel when filling bottle.

Adds about 6.5oz to gun. Overall not very useful and I certainly I will not buy again.