Benjamin & Sheridan Repair Kit Reviews

easy fix for an old air rifle

Couldn't be easier to change out the hard, 30 year old, almost galvanized o-ring seals on the cartridge (392, newer). Follow the instructions included and you'll be shooting again in no time.

The instructions should give you a list of the parts included, especially the mystery little tiny o-ring included so you know it is for the firing pin assembly.

everything there to refresh your air gun

Better more legible instructions

I got this kit to repair a Benjamin-Sheridan H9A Series pellet pistol. It has all the seals you need. The Teflon piece was longer than the original, i think it's for another model. I put the old one back in as it was not worn, but could easily be cut down to length. The pistol works just as i remember it back in 1998.

I purchased this product and it was delivered promptly. I had one question about the tiny o-ring and the tech staff at Pyramid Air gave me a quick response to confirm my thoughts on the o ring. This rebuild kit was very easy to install, a set of o- ring picks are very helpful for removing and installing the tiny o- ring on the bolt. I purchase a set of picks for less than $4.00 at a discount hardware store. Once the kit was installed it brought the power back to my Sheridan 392 to original or better

Directions should be clear as to where the very small o-ring goes, This is not mentioned in the directions.

Great support staff, quick delivery.

Great rebuild kit, brought my aging benjamin back to life. But the bolt seal in the kit was for a 22 cal. and not a 177 that was needed for my rifle. Thankfully my old seal was still good. The new kit did not include the correct seal but still a good kit.

Great kit just did not come with the correct bolt o ring for a 177 cal.

Just as advertised, all parts fit nice.

Have Ben/Sher mod 397P .177 cal

Web site was very helpful in how to find out which repair kit I needed for my Sheridan.

Better schematic, as in, larger print. Needs a better way to determine which O ring goes where. Add in the description that if you are not a handy or good mechanic, this is a challenging repair.

Rifle now works like new.

This fixed my .20 Silver Streak. It was leaking and the pellet would move through the barrel after chambering. I noticed the tip of the pellet right at the muzzel! While pumping I could hear the air escaping and the rifle would not reach a good pressure. The O-rings were flat and the one in the middle of the cartridge (near threads) was hard and fell apart. Now it shoots like new! Each pump is solid. Note: you also get the very small O-ring located on the bolt. I took that apart to make it easier to replace it.

The instructions need to be cleaned up. Also add the replacement of the small O-ring on the bolt. Remove small bolt cover plate (2 screws PN), rotate bolt to expose small Allen bolt and remove. Withdraw bolt from chamber. Replace the small O-ring at the end of the bolt shaft where it contacts the pellet.

Get some good air gun grease for lightly lubing O-rings, seals and chamber threads. Make sure it is okay for O-rings.

Exact fitting parts.

nothing.

I used it to rebuild the valve on my 13 year old Benjamin 392. Seem to work better than the original when I first got it 13 years ago. Less pumping. more psi. Originally when the rifle was new it would take 3 pumps to get the pellet going at lowest fps. Max was 8 pumps, any more pumps were wasted effort. After the rebuild, it will work with 1 pump for low and can go up to 10 for high.

High quality.

Better instructions. You really need a roll pin punch to do this replacement.

product description and delivery service

nothing at this time

Everything needed included

got my dad's old pumper going again after years stuck in a closet

Kit was complete and directions were clear and concise. In less than an hour had my Sheridan C9A "Silver Streak" back up and running.

Not much. There were no directions as to how to remove the bolt and replace the bolt/ breech O-ring. This was fairly easy to figure out.

If you have even modest skills (and can follow directions, you can install this kit and get you air gun back up and running.

The kit contained all the required components. The instructions are good. Using the instructions downloaded from this site allowed for correct identification of which kit to order. The replacement parts in the kit fit perfectly. Installation requires basic mechanical skill, but was very easy. I did have to fabricate a wooden rod to softly drive the valve assembly from the tube. The rifle functions like new now..

These rifles are well made, but after 20+ years, the rubber parts get hard and don't seal well. This repair kit allows one to replace the old hardened rubber parts with fresh soft components.

Kit was complete. Everything worked. Good kit description on line.

Provide a small ampule of silicone assembly grease. A more complete description/instructions of tear down and assembly would be nice.

It was nice to have a kit that ALL! the parts actually fit and worked.

It worked perfect for my tired old Benjamin

The kit came pretty quick. The instructions showed what o-rings went were. Had the rifle up and running in about half hour.

Make sure o-ring for .177 cal bolt is in the package. This package did not have one. Had to use the old one.

Seal kit worked great. Took apart replaced o-rings and back together in about an hour. Pumps great and maybe better than new.

Perfect inexpensive kit to make your tired old Benjamin whole again.

I had recently modified my rifle to obtain enhanced performance from it. New plunger that I manufactured did not stand test of time. Repair kit reverted back to factory plunger. Worked great afterward. Just need to chronograph it now.

Nothing. Kit fit fine.

If you want better performance from your air gun, buy a better performing air gun.