Date: 17/8/2018 14:46
0

Cocking Buffer for TX200 air rifles. reviews - page 1

Average Customer Review

3.0 (2 reviews)
4 star3 star2 star
Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

0 of 0 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By Franklin from USA on 2014-10-18 09:39:32

Things I liked: Not much.

Things I would have changed: Nothing.

What others should know: These cannot be installed with a complete take down of the barrel/shroud. The buffer installed by pulling it through the hole into the shroud. This is done at the factory during manufacturer. Do not buy them because you cannot use them. A o-ring around the end of the cocking handle is better.

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:1.0

Value for money:1.0

By greg from USA on 2017-02-19 09:33:54

Things I liked: The TX200MkIII is a super super rifle. It is the most accurate, well built air rifle I have ever fired. The bluing is perfect and the stock complements the rest of the rifle. BUT, the small cocking buffer leaves a lot to be desired. It is flimsy, the way it is mounted to the barrel is inadequate and it broke and fell off in less than a week. It is a embarrassment to an otherwise superb air rifle.

Things I would have changed: Fix the cocking Buffer assembly.

What others should know: Be prepared to replace the cocking buffer with something else because the stock one will fail in a short time and a replacement part will fail just as the original part did. The whole assembly is inadequate and needs to be reengineered if not be them then by you.

Sort by:
  • 1.0 1.0

    1.0 1.0

    By greg from USA on 2017-02-19
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: The TX200MkIII is a super super rifle. It is the most accurate, well built air rifle I have ever fired. The bluing is perfect and the stock complements the rest of the rifle. BUT, the small cocking buffer leaves a lot to be desired. It is flimsy, the way it is mounted to the barrel is inadequate and it broke and fell off in less than a week. It is a embarrassment to an otherwise superb air rifle.

    Things I would have changed: Fix the cocking Buffer assembly.

    What others should know: Be prepared to replace the cocking buffer with something else because the stock one will fail in a short time and a replacement part will fail just as the original part did. The whole assembly is inadequate and needs to be reengineered if not be them then by you.

     
  • 5.0 5.0

    5.0 5.0

    By Franklin from USA on 2014-10-18
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Not much.

    Things I would have changed: Nothing.

    What others should know: These cannot be installed with a complete take down of the barrel/shroud. The buffer installed by pulling it through the hole into the shroud. This is done at the factory during manufacturer. Do not buy them because you cannot use them. A o-ring around the end of the cocking handle is better.

Navigation