UTG 60mm Add-On SWAT Wheel Reviews

pleased

Works great.

Nothing

Allows for much finer adjustment of the parallax on these excellent scopes.

Pretty cool, glad they come in diff sizes. The 60mm is perfect on my Eagle Claw

Wish it were more of a solid mount

Dont over tighten. Its not a solid type mount. But it works just fine. I like it better than AO at the end of the scope

AWSOME AWSOME AWSOME... So nice to be able to move my paralax easy and smoothly.

Nothing

I bought the smaller one cause the larger on is just to big for my tastes. The small one is compact but works great.

It fit, it worked like it is supposed to and it has not fallen off.

I can not think of a thing I would change on my sidewheel.

If you have a UTG scope with side parallax adjustment and have not tried a parallax wheel do yourself a favor and give it a shot.

Fits my 3-12X44AO UTG Perfectly. Makes turning the AO a breeze. Just the right size for smaller scopes.

Nothing.

Allows me to use the side focus on my UTG scope which is very hard to turn. It was spot on to what the scopes knob yardage was/

Wish I would've bought the bigger wheel but was afraid a bigger one would've interfered with the operation of the Seneca Aspen I mounted it on.

Small size . Good for compact guns where the large size would be to much. Aluminum construction.

The mounting system should be redesigned but otherwise a good value.

Getting the Allen screw too tight can make it move even more so use caution. Remember they're going in to rubber.

what can I say it works

nothing

This wheel fits much better than the 80 mm wheel which is supplied with UTG scopes.

I would prefer 5 yd markings to 25 yards instead of the 10-12-25 markings the scope comes with. Beyond 30 yds the range markings are meningless anyway so better markings between 10 and 30 yds would be preferable.

I really like these smaller focus wheels and prefer them to the 80 mm wheels that are supplied with UTG scopes. They are large enough to give you good leverage on the focus adjustment and a rough idea of range (as good as the 80 mm wheels) and they don't give you the feeling of having a unicycle mounted on the top of your rifle. The stock focus wheels supplied with UTG scopes are too large for most scope buyers and not large enough for the FT shooters. In my perfect world UTG scopes would come stock with these 60 mm wheels and a 100 mm wheel would be the extra cost option.

It works well once you get it on to where it stays put. The build overall is good. Nothing special, Its just a side wheel.

Ok. This is what gave it the 3 stars for me. Honestly I debate if its worth that but it ended up working out for me. First off the set screws are way to short. Another issue is the foam mounting. Foam mounting, Really??? Why UTG went with this is a wonder in itself. One of the set screws went through the foam and actually gnarled up the side focus wheel a bit. Just visual damage nothing that did any real harm. To be honest if this was something that happened with a higher end scope like a sidewinder or something I would not be happy at all. Considering the low cost of the UTG scope I got this did not bother me to much. My solution to this mounting the wheel issue was a quality Adhesive (E 6000) with the use of the screws. I have no intention of taking the wheel off anyway. At this point I have not fully tested the glues durability because this is a new purchase but so far it is working nicely. So keep that in mind if you want to remove it now and then glue would not be the best option

Other then the issue with mounting this little side focus wheel works very well. I am curious why a soft rubber foam mounting with set screws. Being that this is my first UTG scope I only wonder if this focus wheel fits a few different knob sizes. This would make sense. Not the best way of mounting a side wheel but it works for the most part. Would I buy this setup again? I would as long as my mounting solution works out in the long run. Just keep in mind that if you go with the glue to aid with mounting use a glue that has flex to it because of the foam.

Less fumbling adjusting parallax. Have it mounted on a 3 x 12 x 50 SWAT. Simple mounting.

Nothing

Makes adjustments quick and easy. Wheel is made of Aluminum. Quick and easy to mount.

Allen screws put pressure on a rubber lining and this is how the wheel is held in place. One allen screw had epoxy in the threads and was very stiff to adjust. One allen screw went through the rubber instead of applying pressure as designed.

I had to remove the rubber bushing and epoxy a thin piece of tin onto the rubber. The set screw pressed on the tin which allowed the rubber to grip the side focus the way it was intended to. This wheel is for focus not for estimating distance to target.

Easy to install. Easy to use. Quicker focusing of optic using this wheel.

Would like to see four allen screws for securing instead of two.

Quality made.

Nice fit and not too big. It is a well machined wheel that makes adjusting the side focus a breeze.

Nothing

Nope

This 60mm side wheel works very well. makes it easy to adjust the focus. Also makes it easy to fine tune the adjustments.

Nothing it works.

Make sure you loosen the screws on the wheel before sliding it onto the turret. And definitely DO NOT over tighten the screws on the wheel.

I like the smaller profile on my swat scope

Nothing

Great fit, makes adjusting of parallax focus much easier.

Include a needle or new fixed point of reference as the distance indicators (yards/meters) are substantially elevated from the original white dot on the scope body/tube.

Not too big; does not interfere with using a single shot tray in a Marauder.

Lower the price.

Good size for hunting/general use, but too small for Field Target.