UTG Low Profile Weaver/Picatinny Rail Reviews

The mount fit perfectly. Had some other general purpose mounts that almost fit.

Nothing.

Material of mount.

Fit right on my 10/22 Ruger co2 air rifle. I used blue loctite and just snugged the screws carefully, not over tightening as I read the holes on the soft aluminum receiver of that gun can strip easily.

Nothing. Maybe this should come standard in the box with the rifle although the open sights seem of good quality too.

Easy to install, just don't overtighten it. This rifle is accurate enough it should be scoped or red dot applied.

Appears to be quality material. Screws included for mounting.

Nothing

Have not yet installed but having older eyes wanted to install scope anyway and thereby the assembly will cover open screw holes in top of receiver I did not like on the rifle.

Cheep but good quality rail mount.Bought this rail so that I can mount underneath my FX Wildcat MK 2 in order to use a bipod and it fits nicely and looks good too.

Nothing at the time.

You want this rail to be shorter cut it into 2 equal length.

Very nice rail.

Nothing, perfect.

Great price. Fits my firearm perfectly as well as my air rifle.

It was what I needed!

NA

Fit perfect for my Ruger 10/22. Also great low profile to still use open sights. Added a red dot later and perfect rail system for this or any other scope.

Nothing

When you get older these red dot scopes are the perfect thing for eyes that aren't as sharp.

It fits. Well made and the same cost of the .22.

Nothing.

It is the same as the one for the .22 10/22.

Everything

nothing

no; they worked awesome.

This product works well if you want to use a scope.

The height of the vee groove down the centerline blocks the rear fixed sight. I wanted the flexibility of fixed sights and mounted scope. I should have called Leapers. I have a Ruger base ordered. They claimed their base doesn't block the fixed sights.

It fit the contour of my 10/22 perfectly and has more scope mounting positions than the one Ruger furnished with the gun.

Might consider making one in silver color.

If you plan on mounting it on your Ruger 10/22, you won't have any regrets in your purchase. Just do it. It's worth the little it cost just to have more mounting positions available.

The quality of material, fit & finish is excellent. It fit my Ruger 10/22 stainless receiver perfectly. The contour of the mount and my receiver were a perfect match. The holes aligned perfectly and the screws went in very smoothly.

I would like to see the manufacturers produce a mount in silver to match the stainless model 10/22.

I can't think of a thing except it appears to be a good strong product.

I purchased the UTG Rail because its base was already curved, and with some adjustment it could be made to fit on my IZH Baikal 53M pistol's compression cylinder. It is solid aluminum and has good length.

It would be more adaptable if the curved bottom radius could be changed to provide a universal base to fit receivers other than the 10/22.

Once the bottom radius was changed to fit the 53M it was successfully mounted with an epoxy "cold weld" to the compression cylinder. Before mounting the rail both surfaces must be cleaned down to bare metal.