Page 2 of 3 - AirForce CO2 Adapter, Fits Condor Reviews

works! gas up on sunday and shoot all week!

make the price $20 and add a folding stock mount

you need this item! it's worth it even at the current price!

Great quality, fast shipping

It will be nice to have a PSI gauge

Works with any C02 Paintball tank

When i'm using a 24" barrel with my Talon SS I was very impressed with the power an Air Force gun can produce with bulk CO2. For plinking and target practice you can't beat 500+ shots from a 12oz tank.

nothing, works perfectly

You definitely will enjoy this product more with a longer barrel. When using my 12" barrel, the CO2 is roughly half the power than when using a 24" barrel. Also using 30+ grain pellets with a long barreled Air Force gun you can approach 20fpe with CO2!

Great way to shoot in the back yard all day long. I shot my rifle 3 times and then the valve was stuck and co2 was leaking out and the only way to stop it was to detach the co2 tank. The valve in the adapter is not closing all the way.

Test them before you ship them.

Pyramid is taking care of the problem and I will report back after all is resolved.

A+++ Awesome!

Nothing..

Works great :)

Solid, well machined and fitted, STEEL construction, a great accessory for the Talon SS. I went with CO2 because most of my shooting is indoors at 10 meters, and the CO2 velocities from the 12 inch barrel fall right into the indoor range restrictions (400 - 600 fps.). I have over 600 shots downrange so far and still going strong.

There's not much to change, this is a device that was built for one purpose and the fit and finish are exemplary. Great way to enjoy the Talon.

I gave it 4 stars overall because the actuating pin in the back of the adapter (the pin that opens the valve on the CO2 tank) was too short - CO2 gas would not enter the adapter, and the gun would not fire (and no, it wasn't the tank, I tried it on 3 different tanks - only one gave even a faint his as the adapter was screwed down tight). Being a resourceful chap, I looked around for a means to get it to work (I hate waiting for returns from manufacturers, I wanted to shoot immediately!). It turns out that the cup from a fired small rifle primer, with the anvil removed and the combustion residue cleaned out, fit over the end of the valve pin on the CO2 tank and provided enough additional length to get the gas flowing. It's working GREAT now and I wouldn't trade it back now for anything!

Highest quality. Solid as steel can get!

Nothing.

CO2, thousands of shots, vs hundreds with HP air. What's not to like?

very nice and solid construction

I wish that was shorter

Solid construction. Installs as easy as screwing in a light bulb.

Valve stem kept creeping out over night preventing me from pulling the bolt all the way back to lock it. Had to push stem back in by hand to make it work. Sent it back to PA, they paid shipping both ways and sent new one back same day as old one arrived at their location. Good job PA!

I gave a 4 for overall because of the defect but a 5 for value because a working one is well worth the money.

The CO2 Adapter was a good investment. I now have 2 one for each of my guns. I have one on a Condor and the other on a Talon SS they work great.

You will not get the speed as if you are using compressed air, but go get some cheap pellets and have fun putting holes in paper.