Page 5 of 7 - BKL 1" Rings, 3/8" or Reviews

A bit pricey, but worth the investment as the slim design can easily solve mounting issues. I used these to mount a 3-9x32 Compact Bugbuster and initially I could not get the scope rearward enough to allow for proper eye relief on my P-rod. After installing both mounts as close as possible to center of the scope, both mounts fit perfectly on the rear portion of the dovetail which solved the problem

Nothing as these are great design and always align true to the barrel.

Self centering

Lower price

All of the other mounts I tried placed the scope slightly off center on my BSA Lonestar. Only the BKL placed the scope perfectly centered over the bore.

Very well thought out, quality in manufacture.

Nothing

Used these when scoping my Walther LGR with Leupold 3x9 EFR. Not a lot of room in the dovetail slots for double screw rings, these worked perfectly.

Very nice rings, clamp down on any dovetail rail securely. They align your scope to the bore properly. These rings are fine for springers or PCP, but you might want double strap rings for the magnum springers. Finish is great, and just a very well made scope ring! Why spend near the same on Chinese rings that do not have the high quality that BKL has?

Nothing. Even the price is fair, considering they are made here in the USA!

Don't over-tighten the screws. If your known to be heavy handed, get a torque screwdriver! These rings are well worth the little bit more that they cost over cheap, inferior Chinese rings. Again, a magnum springer might want a one piece mount or the double-strap rings. These are all I will purchase to use on 3/8" or 11mm dovetails from now on.

Quality is top notch. Hex wrench is included. Self centering clamp is very accurate. No sharp edges.

Price should be cheaper by a few bucks.

BKL mounts are the only kind I use. They are a bit pricy but you don't want to skimp on mounts if you care about accuracy and secure mounting.

USA made

Did not include all the hardware. The missing bolt that clamps the mount to the rail is missing and of all the hardware in my toolbox I have no match. I would not recommend these rings to anyone. I'm disgusted.

I do not recommend BKL at all, it came incomplete

Rock solid and self-centering are traits that make BKL mounts so very good.

When you spend several hundred dolllars on a fine airgun with quality optics, don't cheap out on your mounts.

Everything! They work amazing and they are made in the USA! They line your scope up to perfection!

not a thing.

buy a nice set or rings before you spend any money on a scope the rings will make a big difference.

Well machine and smooth also keeps your scope straight when first mounted.I useing these ring on my Benjaming .25 I be buying one more set for my cz 452 varmint.

none

Well worth the money (PLUS THERE MADE IN USA.....)

These are light weight and auto center.

I would make them sleeker to fit in tighter to the scope

Good equipment.