Page 6 of 6 - Air Venturi Moly Metal-to-Metal Paste Reviews

Heavy duty lubricant that will stay put for an extended period of time compared to other lubricants.

Nothing.

The moly component of this lubricant will be burnished into the pours of the metal with repeated movement of the action over time. I believe this provides superior lubrication over the life of the airgun.

Application was simple,it didnt come with instructions,but it does say a little goes a long way.

nothing

I massaged the grease onto the piston,starting behind the seal.If you just wipe it on you would end up using more than needed.Cleanup was easy,my rifle never diesled,and now performs like a tuned rifle.Very satisfied with the product,and shipped fast.

Little dap of this stuff all you need.

Price

Its small but Will last you forever.

A little dab will do ya on those metal to metal parts.

Nothing

You don't need much. This stuff is slick as snot!

If your going to venture into the world of disassembly and tuning this product is indispensable. A little goes a far way, do not exaggerate. The jar should last you a life time if it's for domestic use.

Nothing

This grease is intended for use on the outside of the piston,super slippery stuff. Don't get it on the piston seal. The seal you lubricate with crosman silicon oil a drop or two before reassembly. Do not use on the main spring for this part you need a grease called tar this will help to avoid vibration. A good part of the fun with airguns is getting to learn how to do this type of maintainance yourself. It's really rewarding to take a gun apart and make it shoot better. Check out airgun arena.

Works like it says it should. A little tab a do ya. Use sparingly.

Nothing

Great for those metal to metal parts, especially bolt actions & break barrels.

The product works. I am told it is a superior lubricant.

I have read that many moly pastes, particularly the stuff you might find at an auto parts store, does not contain high amounts of moly. I assume the Air Venturi moly paste does.

Works as advertised

not a thing

applied with artis paint brush from local craft store. this keeps the molly pin pointed in the applied areas and keeps clean-up to minimal

It does the job. I did my first complete tear down of Hunter 220. Used this where it was required. Gun is smoother and quieter than before. Good stuff.

You don't need a lot. And, it is like "Never Sieze", as it will get everywhere if you are not careful.

Great product! But messy!