Page 2 of 2 - AirForce 11mm-to-Weaver Reviews

piece of cake install. Looks to have plenty of room for bipod and predator light. If not, I'll have to buy a second but this is a quality piece. My Condor SS is looking sick with the bipod!

I feel like it is highly priced but that is an individual perspective.

Perfect Match for my Hatsan Supercharger 25 pistol!!! Rock solid mounting used a Vector Optics Green Dot Micro reflex sight. Awesome combo!

Nothing!

Perfect size for the shorter length dovetail on breakbarrel pistols. And......Rock solid mount, absolutely no movement from the super magnum spring in the Hatsan Supercharger pistol!!

Works like it should ! Scope didn't move a micron!I mounted it on a Browning 800 and the 800 shakes 90% of the scope mounts off and trashes the scope. This is one of the 10% it doesn't move at all!

I didn't know that the other screws opened the mount to fit on the 11mm groves on the Browning 800. Better installation directions would help. None were given with the mount.

I mounted a $350+ AimPoint on this mount and it shoots nothing but 10's

I like that it has four machine screws to hold it to the dovetail,Strong hold.

nothing

I read the other reviews and what I did to help not to have machine screw problems was to clean the threads of any aluminum,and put a drop of gun oil on the threads and the head of the machine screw.Then tighten them 1/4 of a turn,first the two center ones then the two outer ones untill they were tight.
What I did with mine was to machine three tabs off to install the hardware of a bipod called polecat made by Stoney point.I have three bipods which I interchange with other guns.One is 5 inches for bench shooting.( I modified it),One is 12 inches and the other is 43 inches for sitting.The legs do nt fold so you have to carrie one or more with you.I like this setup maybe you will to.This AirForce adapter holds these bipods very well.

Installed very easy,just slide it on and bolt it down where you want it.Purchased this for a bipod,very solid platform and it looks killer on the Airforce rifles!

As others have said,a little longer would be an extra plus.

Shoot Safe! Happy Shooting!

Well made and works great on my Condor SS rifle. I knew going in I would need two for my scope setup, so I have no complaints but they should be less money or make them another 1" to 2" longer for the same price.

Lower price or make longer.

They do clamp extremely well on the 11mm dovetail on the Airforce Condor. Once properly tightened down, they aren't ever going to move.

Sturdy construction Looks goon on my Talon SS

Too short for scope Slightly overpriced

This is a great product. It has a solid construction and perfectly matches the look of Airforce rifles. If it was $10 less and longer it would be outstanding. Since I used it to mount a small red dot sight the length was not an issue. If you want to mount a larger size scope you might want to consider purchasing a different mount (or 2 of these).

adds height and makes it more versatile for adding accessories.

Make it an inch or two longer

It secures good to the Talon SS dovetail rail and the spec is within tolerance for picatinny QD mount.

Why is it so short? I had to get two to give a bit more room to secure my Larue LT-104 QD mount which I swap back and forth with my AR. Can't Air Force just make one that's couple inches longer?

I have to get this adapter for the Talon SS so I can mount the big scope with the QD from my AR. Air Force should have given options for dovetail or picatinny rail for the rifle so I could reduce scope height. Perhaps I just need to buy a dedicated scope instead...