Page 2 of 3 - Benjamin Scuba Yoke, K-Valve Reviews

WORKS GREAT...REMEMBER FOR K' VALVES ON SCUBA TANKS..

1 METER AIR LINE...

Works as advertised, simple to use

Nuttin

Worth the money,

I like the easy operation.

The screws to lock the gauge to the tank is not strong enough when its screwed on tight.

Perhaps you should consider having the manufacturer send with two screws for tight positioning.

works as designed, great quality, nice and compact, great for the field.

a longer fill whip would have made it easier to fill the gun.

Robust construction, easy to install.Bleed screw is easy to turn.

Add about 2-3 inches to the high pressure hose. Make the guage about a half inch larger diameter.

This is the most common valve connection for scuba tanks.

I like that fact that this yoke was made to transfer air from scuba tanks to my Marauder. Made it so easy instead of using a "bicycle" pump.

The hose could be at least 36" long to transfer air a lot easier and the Gauge a litter bigger so the elderly could see better.

If you're thinking of using a scuba tank with a "Yoke" valve to transfer air to your air guns, this is an awesome piece of equipment to have.

I am very happy to be able to air up my marauder now without having to use the hand pump. It takes a lot more air to refill the reservoir on my marauder than it did my discovery, and at nearly 60 years old with a bad back, it is now a breeze to fill. The yoke fit and attached easily to the scuba tank I purchased locally, and seems to work just fine.

I do find myself wishing that the hose on the fill adapter was a bit longer, but the trade off would also be more lost air each time the line is bleed off. As you get older and require reading glasses for small print and small gauges, a larger manometer with larger dial and numbers would be a plus. I find myself having to put my readers on each time I want to charge the rifle. Not so much of an issue for young eyes.

Overall I would give this scuba yoke a good rating as it is very usable, but it could be made better esp. for older shooters, and even younger ones. How much could it cost to add a few inches to the length of the hose, and add a bigger gauge? Also just a word of thanks to Pyramyd Air for their fast shipping, and honesty in suggesting buying the scuba tank locally. Was able to buy a brand new tank at the same cost with free inspection and first air fill free. Honesty and good service keeps customers coming back.

Top of the line. Will not rust. AWESOME VALVE

NOTHING

Now that I have this item connected to a scuba tank ,I can fill my MRod .25 cal to 3000 psi. The easy way

Longer hose would be better

Price was alright . But like I said if hose was longer ,I would still pay for the extra length . Don't know WHY they made it short.

well built easy to use