Air Venturi Wingman 74, 74 Reviews

Light weight, bought it at a good price. Works as it should.

The fill hose could be longer, maybe a bit higher quality. 2 gauges would be nice, as well.

Not much. I bought this tank to replace one that is almost "aged-out".

This tan k is holding air...yippeeeee

test your tanks and valves before shipping

The tank is a perfect size. Easy to carry around. I haven't used it yet, but I had it charged up at my local scuba store with no issues. No leaks.

None that I can think of

I love the Carbon Fiber tank. The tank is very light and is well made. High Quality.

I would have put a better gauge and valve set on the tank.

My experience with this tank has not been great. I feel that the main tank valve is too hard to turn. The manual says "Use thumb and finger to adjust the valve flow rate". It is far too hard to open the valve and adjust the flow rate; not at all possible with thumb and finger. I found the rate of air flow when opening the valve is far too fast. It is difficult to achieve a slow flow rate. I also feel that the 'bleed valve' needs to be tightened with a tool (pliers or channel locks). If tightened by hand compressed air will blow passed the valve seal after about 200 bar of pressure is reached. It only seals reliably when you tighten the valve with a tool. Pliers work OK. I spent several hours with Air Venturi before I discovered this issue. In my opinion, the bleed valve is unreliable. Others may find it easier to work with these valves than I did. My 4 Star rating is based only on the vales. Otherwise, it is a great value for the price.

The bottle allows ease of filling pcp air rifle in field without lugging heavy PCP compressor around.

Wish it came a male foster conection on valve and double female foster hose to disconnect for ease of bottle re-filling.

Puchase male to male foster probe for re-filling bottle.

well built

nothing

The fast response when I needed to exchange the tank due to a frozen valve when the tank was filled to 4500 psi. Even with the replacement tank I needed to use a pair of channel locks on the valve to get it to turn when the tank was completely filled. As the pressure has decreased the valve has become easier to turn by hand.

Send the customer a tank manufactured within the past 12 months.

Customers should be told up front that the 15 year tank they are receiving may already be two years old, thus losing over 10%+ of its life before testing is required, yet the customer isn't getting a 10%+ discount on the tank. I think this is pretty shady.

Nice size. The 74cuft was plenty of air for me. The micro hose regulates the fill time so you do not have to worry about filling your gun too quickly. Great tank for the price.

Tank should include a male to male adapter.

The hose does not have a quick detach. So you will need to buy a male to male adapter for the hose to fill the tank.

Very light and easy to use.

An attachment that creates a flat bottom. It's not ideal to have a pressurized canister that can't support itself. I know you can buy an attachment, but it would be ideal to have a display of the internal pressure. The thing costs over $500 after all.

I had it filled by my local paintball facility. Cost about $20 - which I found very reasonable. He said it made him a bit nervous because it makes a lot of creaking noise, etc...which I assume is normal for carbon fiber.

Nice tank just the right size

The date on the tank is 2020 thats 2years old so guess I only can have it filled for three years by some one else that is a real bummer, not happy.

Be careful its a role of the dice on hydrostat date . Hopefully you do better than me