Page 2 of 4 - Air Venturi QD Fill Port Reviews

Very well built valve cap. Unfortunately it cant be used for the gun I purchased it for because it can be removed without removing the compensator first.

Should have an alert when buying that it may not work with some barrels configurations.

If you arent running a compensator, silencer its probably fine.

It is very difficult to remove from the fill port of my gun (2020 LCS Air Arms SK-19), and sometimes it requires a lot of force to install it. It wasn't as bad for the first couple of months but it has since become very difficult.

I would do away with o-ring all together and instead use a magnet to secure the cap. At the very least change the o-ring so that it is not as difficult to remove or install.

If you have a gauntlet you know they have a rubber type cap on the fill valve. I have had three of this tpye and lost all at the range. I have not lost one of these caps yet. I have been at the range about twenty times. I have three rifels that needed the caps.

Nothing

The caps snap on and stay put.

Protects the nasal head of my Air Venturi SS Female DIN Adapter With Male Quick-Disconnect!

N/A

This is a great protector for storage!

Works great on the ones it fits.

Make it so it fits all of them.AOA has them with magnet & they fit all.

They won't fit on some Quick-Disconnect Male Fittings.

Simple and affordable

Nothing

Great addition to any exposed foster fitting or if your like me, the air guns that have fill probes I leave in the gun and use these caps to keep the dust out of them and my guns.

Quality

Well, it will fit, but fell off the gun into oblivion.

It didn't want to stay on my Marauder. I would gently tap it once on, but never felt it lock into place.and it simply fell off the gun one day...I only had it about a week before it fell off.

spend the money and get the original equipment instead of this thing.

under trying times fast delivery

cost of mailing charge which cost more than item

used Cap protector on 2220 Marauder

Seems quality made. Mine does not have the "AV" on the end like shown and is not magnetic or metal but does have an o-ring inside to keep it from falling off.

Air Venturi needs to check their sizing dies because something on this quick fill port protector cap is off, it doesn't fit their Air Ventuir male quick disconnect fitting I purchased with it to use together.

Mine didn't fit the AV male quick disconnect or my LCS SK-19 fill nipple. It did fit my Joe Brancato Guppy Tank male quick disconnect. Don't know what to tell you.