Air Venturi MK5 Pump by Reviews

Very easy to pump my Air Venturi Avenger to full psi. Easy to fill while hunting or plinking

If it where to come with the female adapter already instead of having to look and buy one.

If your going to buy this hand pump make sure to also buy a 1/8 BSPP female quick- Disconnet Connector adapter in order to pump your PCP.

What can I say? It does the job it was intended for very well.

nothing so far

Works as it should, very well made.

Pumps fairly easily up to 4000psi. Haven't gone over that yet. Works better than my Benjamin hand pump.

Make a better moisture trap. I made one that the desiccant filter can be unscrewed and replaced with a standard filter. Design the pump to dissipate heat better.

It's a little workout filling up to 4000psi, but still works better than the Benjamin hand pump. Go ahead and get a pump kit or at least get some of the little o rings. I've got some really abrasion resistant ones ordered. Regular ones won't last as long as it takes to replace them.

Longer hose, handle seems sturdy.

Collar that secures foot to pump could be metal.

New to PCP's. Only high pressure pump I've used and it fills my Marauder without strenuous effort using slow and steady 10 pump repeats.

How do I send this garbage back!!!!!!!??????? Item arrived about a week ago. I assembled it about an hour ago. Tried topping off my talon p with it was losing airAND GREASE faster than I was putting any air in! After tightening almost everything on it, I tried again. No use. Still losing air as one where. I have an original Axsor that's at least 30 years old. After all these years it's in need of a reseal kit and, probably the little brass valve. Instead of fixing what has proven to be an excellent pump, I fork out a couple hundred bucks for this junk. I own several English made air guns that are leagues above this thing in fit and finish. Makes me wonder if it was made in China and assembled in Sheffield or wherever. It was even blowing grease out of the topside of the brass fitting at the base of the outer shaft housing. It was loose as a goose. And why so much grease to begin with!!!??? I just want my money back. No replacement junk. Sorry I ever ordered this thing right off!

I'd try to implement some degree of quality control into the manufacturing process, first of all. Beyond that, I don't even know what to say right now.

Yeah sure. If you buy this, be prepared to spend money and time repairing it to the point whereupon it becomes a functional device. How much time or money that will entail, will ALWAYS be a mystery to me. I'm not going down that rabbit hole.

Beautifully made.

Add/include quick disconect fittings. Needs longer hose to keep gun out of dirt

Way too hard to pump. I was going to return it BUT return shipping was ATROCIOUS ---$45 from Calif back to Ohio. P A does not pay return shipping

Beautifully made.

Add/include quick disconect fittings. Needs longer hose to keep gun out of dirt

Way too hard to pump

Solid and well built. Pushes air in on both direction. But still a lot of work.

I would've incorporated a filter on the line instead of buying the overpriced one.

Instead of buying the Air Venturi filter for $45, I cut a strip of charcoal air filter and wrapped it around the tube around the air inlet. Just starting on this Air Rifle Hobby and trying not to spend too much too soon.

Not paying for a compressor. Works. Effort, but it works.

Somewhat expensive for a pump? Extend the hose length. Very short.

You can use this. For kids, it may be difficult, but if you can be directly over the pump, it wasnt that bad. These dont work by how fast you pump, rather it will fill and then as you are pushing down, compress the air to about 3 inches that you must push completely down. Feels like two NORTH magnets resisting each other and you have to make them touch.

Never let your rifle go completely empty. Let fill get down to 1000 psi then pump back up to 3000.