Page 5 of 8 - Air Venturi MK5 Pump Kit Reviews

Easy to assemble. Easy to pump even up to 4350psi.

nada

Works like a charm.

Nice box.

The whole vertical tube assembly bent at the base. I have been filling my Avenger up to 300bar, pump might have held up better if I used it to a lower fill presssure. I have only had it 5 weeks and used it for maybe a dozen fills. The non-return valve sticks open half the time.

No spare orings are included(cheap Chinese pumps come with spares). Better idea to buy 2 or 3 cheap pumps instead of this overpriced pump.

The pump was easy to assemble and does exactly what it is supposed to...put air in a gun.

There is nothing I would change.

It is a workout. I have a FX Maverick VP and it took between 150-180 pumps to fill. I bought a compressor! :)

I have the Hill MK5 w/ moisture filter attachment. Only used one time, so far, but it's much easier to use than I thought it might be. (I'm in my 60's, 180#.) Filled the M-Rod from 1,450 to 2,900 psi in 14 minutes total, while resting twice at the 50 & 100 pump-stroke stages. Was done at 140 total pump strokes. Old man didn't break a sweat! This gun has a relatively small air reservoir, tho. I might be singing a different "tune" if I had one of the big tanks that are out there.

Nothing yet! Time will tell, as far as durability goes.

Read and follow all directions. Pump slow and deliberately all the way to top and bottom. Don't rush. Release the pump bleeder fitting BEFORE disconnecting the hose, when done.
I was very pleasantly surprised at how well this pump worked for me.

It works great you just have to take your time or it will over heat you need two pump it slowly

Nothing to change

Worked as it was advertised. Well constructed and sturdy.

Nothing

The added water separator works very well. The pump is well built and sturdy. Assembly was super simple and it's not that hard to use

Works like discribed and was fast delivery. Will be ordering from this company again

Great service

Very well made and works well to charge my rifle. I like the anti-moisture add on and it was easy to assemble.

I would have a longer hose not too much but another couple of inches would not hurt

Great product, well-constructed and worth the $$ spent.

Nice pump, works well to fill up a PCP. Kit comes with some useful additions. Gauge matches the air cylinder measurement, so it's accurate.

You better be in good shape!

well built heavy duty construction

longer hose have to lay gun on the ground.