Page 5 of 12 - KWC CO2 BB Submachine Gun Reviews

The gun looks really cool, and the full auto is a blast.

increase BB capacity in the magazine. I'd sell a rubber butt plate for the collapsible stock. Redesign the selector switch.

I was SO excited to get this but ended up disappointed through no fault of Pyramid Air. Firstly, mine says "MINI UZI" on it but it doesn't show that in the pictures (headscratch), I can't help but wonder if I was sent the wrong gun?There's a TINY little sliver of a picatinny rail. It's useless. Also, the recoil on this thing is brutal if you've got your cheek pressed against the stock - which is unavoidable if you're trying to use the sights. It's not very accurate, and devours CO2 in full auto, but is tolerable in semi, good luck getting your selector switch onto semi though. It seems it wants to go from safe to auto easily enough but you have to work at getting it onto semi. It's HEAVY. In retrospect I should have saved my money and purchased something else, like the M712. I think I'd have been happier.

Not much at all

Make in USA and not Taiwan and make with forged steel instead of sheet metal. Sights are absolutely useless.

I bought the full auto version, my selector switch was hard to move and made of plastic. It would fire more than one BB in single shot mode. The magazine is a slow process to load just to get a couple of 5 second blasts then you have to load again and may get two clips at most before it is dead again. Gun is noisy but not from co2, it is from the banging of the slide which sounds like an old washer machine because made of sheet metal and not authentic sounding like other co2 guns. There is no accuracy either, BB's just fly every were. Sent back for refund. Trust PA, they do stand behind what they sell and correct any issues from bad guns.

It's a heavyweight and the fun factor is there when spraying BBs.

Very weak, won't go through a 2 liter soda bottle full of water. Make sure you plink empty cans.

The fun lasts 5 minutes. Spend your money on power instead.

The fact that P A offered a full auto modification.

The price, and the origin of manufacture

The gun is made of sheet metal/plastic, not solid steel. Made in Taiwan so no Q C. The selector switch is plastic and mickey mouse and sloppy. My gun is unpredictable and shoots multiple bb's even in single shot mode and in full auto they fly all over the place with no accuracy and the plastic sights are absolutely useless. The gun is going back to P A for a refund. I have bought many guns from P A some are better than others. P A is great for refunds because they understand that some are not perfect. This gun is one step above a toy so don't waste your money on this one.

It seems to be well constructed and is a very close copy of the real mini-uzi.

It does not work as it is supposed to. I even sent off for another magazine thinking that might be the problem but it still did not function properly. It will fire six to ten bb's and then all the CO2 blows out the barrel in one long gust. Even when in semi-auto mode.

Unless they work the bugs out I caution against buying this particular model. The thing WANTS to work, and it would be a really fun gun if it did, but it doesn't.

Wow this mini uzi is very realistic & fun to shoot. This thing is solidly built and very accurate looking. Weighs about 5 lbs (w/o bbs) and the blowback action on full auto is very pronounced making it very enjoyable to shoot. Accuracy is also very good. The cocking & bolt action is very accurate too. The sound is also nice and loud and realistic on full auto mode.

I would love if the slide locked open after the last round like the airsoft version.

Buy this gun. It's a classic, looks/feels great, and tons of fun to shoot.

I love it beautiful gun

Nothing

It's a lot of fun

Great replica for the money. This thing has weight to it feels a lot like a real gun. Looks very real. The only problem with mine is the button that must be pressed down to adjust the front sight is jammed. But it can still be adjusted for windage which is a nice feature. It is very easy to adjust. You can easily make it full auto all u have to do is remove a little plastic chip underneath selector switch, it is put there by the manufactures. However this will void your warranty. It is extremely fun in full auto.

Front sight adjustment. Less white writing on the side.

It's fun

FULL AUTO!!! Looks RIGHT!!

EATS CO2 CARTS.!!! I get about 1 1/2 mags out of a CO2 cart.

Ergonomics, weight, balance, are very similar to the Mini Uzi. Likewise, the operation and safety procedures are the same as the original. Cyclic rate is more like a regular Uzi, or even an M3-A1, two or three round bursts are easy to fire on target. (6 ish meters) Regulation sling fits. This gun is a total blast to shoot. Be aware that this BB Uzi looks and functions like the real item, so decide carefully where and when you choose to shoot. This design was obviously done by real Engineers. I like it.

Extra magazine(s) would speed up reload, are they available? . The stock could be made of steel, or a more rigid material.

One magazine is included. BB column, gas cartridge, and control valve, as well as the weight of 20 9mm rds.,are in the magazine. 25 rd. capacity, but you will burn up one CO2 cartridge per BB load, due to the energy required to move the life-size bolt fast enough to simulate standard function. Don't try to milk more shots per cartridge, as less than full pressure can cause a jam, usually a double BB chambering. Semi or full auto deplete gas at the same rate, as the total bolt excursion is the same. New cartridge with every reload and it shoots without fail.