Beeman 1085 Reviews

It's a great value. Pretty good solid feeling stock for the price. Easy to shoot accurately. Feels solid and less toy like than others. You get a good number of shots from the two CO2s. Of our 6 airguns this one has the best trigger.

The magazine is terrible. I stopped using it. Now I only use the single shot tray. Unfortunately even the single shot tray has a problem. The pellet can fall backwards off the tray and fall into the rifle where it gets jammed in the mechanism. This makes the gun stop working completely. I'm afraid that eventually a pellet will get permanently stuck in there and I'll have to dismantle the rifle to get it working again. The stock isn't tall enough to rest your cheek on and have your eye line up with the sights. This also makes it difficult to use a scope. It's difficult for my 10 year old to pull the bolt back all the way to cock it.

Even with all the negatives I would still recommend this rifle. It's just a lot of fun to shoot. Good trigger. Lots of shots from the CO2. Easy to shoot accurately.

Steel breech was nice and overall for the low price point this was a good co2 rifle.

The gun leaked from the breech into the barrel right away. I paid for the 10 for 10 test and the tester noted that the gun held pressure.

Fast and relatively easy return process. Also I didn't have to pay shipping for this return.

The rifle is great

Magazine

Exelent gun all round. I could not find any other gun on the market that could check off boxes like this one. First off were talking 500fps. Fellow canadiens this is as good as it gets! Sure you cand find breakbarrel that will do but then your talking singel shot and over 200$. This is co2 and 10 shot repeater bolt action! In a 22! Thats a lot of stopping power. It doent end there though! The shot gun looks of this is very intimidating. Long Dove tale rail on top for a scope allows alot of mounting options it also cool with just iron shights that are adjustab.

Barrel is heavy would be nice as SBR or sawd off. And if there was some stock options loke removable. You could then fit it in a back pack. Any weight reduction would be helpfull. Co2 change is a chore gotta have a lot of thumb strength or risk putting tool marks and then youn risk over tightening. Your judgment call

The handle fornthe bolt action popped off inhad to put back in and tighten a set screw in back of bolt. Very tight and sharp edges when changing single shot trey to multi. Be firm and cautious

It is a cheap CO2 with good accuracy when it is behaving.

quite a few. Here they are. But thanks to PyramydAir for doing a smooth exchange for me. The first shipment I got, it has a pretty bad spreading issue. I can get a few good shots, then the pellet will land on different spots on the targets. After two dozens shots, I had three grouping spots. The one I intended, and two other groups. And also a few shots that landed nowhere near these three groups. (I don't have any issue with my other air rifles. BTW, I did do a clean up as someone else suggested in the comments). The target is at a range of 12 yards. So I have asked PyramydAir do an exchange. The replacement arrived a few days ago, and the grouping is better, but the issue is not completely gone. I get a few good shots, and one pellet will land about 1.5 inch high, 0.5 inch left to the target. A few good shots, then the a runaway landed at the same location as the previous runaway one (1.5 inch high, 0.5 inch left to the target). I can live with that.

The magazine and the single shot adapter came with the gun, in the second shipment, are completely trash. When using the magazine, I can only push the bolt halfway, it won't reach the endpoint. The pellet hole in the magazine is just not constructed correct (the first shipment's magazine is also tight, but it works). And the single shot adapter, also very hard to push it into place, and I have to use sandpaper to enlarge it so the bolt can be pushed through and completely engaged (I destroyed one of the o-rings on the bolt after a few more dozen shots, due to the sanded place is not smooth enough). So now I'm using the gun without the magazine and without the adapter, LOL.
Seriously, Beeman needs to talk with the factory( they are manufactured in Shanghai, China) to improve the quality. I actually call Shanghai (LOL, it's my hometown) factory and let them know that the gun and the accessories has some issues.

very accurate,and good power,I shot this rifle right out of the box at a trap the full length of my basement and all 10 shots were in the bullseye,reloaded magazine and shot again ,right on the money

the magazine

the magazine takes a bit to get use to loading it ,and the 2 spare magazines i bought at $20 a piece kept jamming and one of them broke

everything

nothing

buy it you'll like it

I like the construction.

An easy way to buy another magazine.

Sometines in the magazine get the pellets stuck.

Would have been nice if it works

Have to return it for exchange ko

The rifle is great! accuracy is good, good weight also feels good when put to shoulder, terrible magazine!!!!!!!!!! i don't know if it's broken but i just gave up on it and use the rifle as a single shot, otherwise the rifle is a good value, only issue is the magazine.

work on magazine and include two of them.

Buy it for a single shot works great.