Reximex RPA Reviews

Good looking air pistol. Very nice grip. Quality made, accurate, not too heavy. Comes with a padded bag.

Bigger air cylinder, standard scope rail, metal sound moderator adapter.

Shoot 3 magazines so far no air leaks.

This single action pea shooter is a blast!! I now own 13 PCP handguns and I like all of them. This Reximex is well designed, well made and fits my XL hand very well, without modification. Besides being great looking {I have the Blue laminated grip} this hotshot will put a whole mag of JSB pellets into a ragged hole at 10 meters, all day every day!! I use JSBs in all my PCPs, from my FX rifle down, and I have no need to purchase any other pellets. The regulator in this peace is a real winner, and I notice NO change in power/speed for nearly 28 mags! Certainly one of my favorites and I have no regrets purchasing it from Pyramyd!

Nothing

It is not the most expensive PCP pistol I own, but it certainly lacks nothing my other guns have!!

I love the grips (walnut). Fits my hand almost perfectly (left handed). Plenty accurate at this price point, around 1.25" @ 25 yards off of bags, about as well as I can shoot irons. The .177 seems to like crossman 10.5 average 678 fps over 60 rounds (radar chrono). Doing 54 shots per fill and is almost down to 100 bar could probably squeeze out another 10 without problem. Shoots RWS Meisterkugeln 8.4gr around 675 fps and slightly tighter than the crossmans listed above. I'll save the RWS pellets for my crossman 1701. Not worth the price difference in this gun. Trigger is very good, would put it up to my better bullseye .22 powder burner pistols. There's better but not a repeater at this price point. Yes, my 1701 is better, but not by much. Overall this is a tough one to beat without spending quite a lot more money.

I would like a rear sight with clicks and have an elevation adjustment. Would be nice to have a 22mm rail instead of the 11mm one. This would make it much easier to get a good red dot for it, without an adapter plate you're stuck with mostly airsoft cheap dots. The pistol is worthy of a better sighting platform. Saying this the sights are quite visible even to my eyes.

At the end of the day I think you get what you pay for and I bought the .22 first then the .177. I liked the .22 enough to get the 177 and liked the .177 much more. The .22 is quite a lot louder and could use a good can, uses about 2 to 3x more air. I think you're getting quite a lot for what you spend on this one. Ebner

Quality construction, laminated grip (fits my XL hand), fantastic accuracy, ease in mag loading, padded carrier, trigger break.

Can't find anything to change at this point. Price for walnut-gripped gun is fair, but I had to have the flashier blue laminated job, and that was a bit pricey- I like it though.

Get ready to have extended periods of fun - great gun to have accuracy challenges with your buds or family members! My fingers don't work as well as they used to, so all the guns I order are at least .22 cal. This makes 13th PCP handgun I own, and I like all of them!

My RPA is a .177. I had the leak test and 10 shot test done with the purchase. Delivery was quick. I put a red dot on it and shoot in my basement with a buck rail moderator

The factory grips are very nice but in my opinion are designed for one hand shooting. I would prefer not such a radical angle and a more rounded palm fit for a two hand hold. I may take a wood file to it this winter. I have not been able to locate an aftermarket grip.

Pretty loud and the moderator helps a lot

I mean what is there not to like about it a very affordable 11 m air pistol.

I do not like that grip but partial to my hands having problems seeing that I am right hand dominant it does not fit well yet if I shoot it left hand it fits perfectly Even though those grips are supposed to be right or left handed it is not the gun per se it is my right hand.

Comes and it's nice little soft sided phone carrying case with all the cutouts and three magazines too small and one large.

Very nice PCP pistol found it to be as accurate as the reviews you can find online.

It has a loud crack when fired. It comes with an adapter to add a moderator. I put on a 3D printed one and now is a pleasure to shoot indoors.

I purchased mine as a refurbished and had the 10 for ten test. Also received my RPA in like new condition. Mine is in .22 with blue laminate grips. Very accurate at 30 feet indoor range. Not pellet sensitive at least at 30 feet. Very smooth lever. Also like the dovetail rail system. Put on a Buck Rail moderator which mad it very quite. Just love this pistol. Nice addition to my airgun collection.

Maybe a picatinny rail system. Not a big deal because one could add a dovetail to picatinny adapter.

Super nice pistol well balanced and it's beautiful. A real work of art.

I bought a refurbished blue laminate grip and it came in perfect condition and shoots as great as it looks. I have one in .177 and in .22 and they shoot great. The .177 really likes the H&N Hornet Pistol pellets and the .22 likes the FX or JSB pellets.

Nothing at all. This pistol is in its own little niche and there seems to be nothing like it for the price. I would have bought brand new but they seem to sell fast.

The different colors sell really fast so if you see one you like in stock snag it. I bought mine refurbished along with some other used items and everything was basically brand new from what I could tell. PA refurbished airguns deserve good owners.

This is an attractive and well-made airgun for the price. Very solid build with blue laminate grips. I added a CVLife Red Dot sight and found myself hitting tight groups at 15 yards. Shot count per fill was very good, using 7.33 H&N eXcite Econ II Wadcutter pellets. I did 82 shots and still had lots of air to spare. I suspect over 100 shots per fill would be realistic to expect. Love the blue grips.

I found the trigger pull a little heavier than I would have liked. Mine measured 3.7 pounds. There is a trigger adjuster but that only addresses the pre-shot travel, rather than the actual trigger pull. However, the break point is pretty smooth so it might was not a problem for me. I would also like to have had a choice of barrel shroud colors to match to my blue laminated grips. I was able to order one from the UK to further dress up the airgun.

My first delivery on my RPA had a 30% per day air leak, so I returned it for repair or replacement and had PA do an air leak test before sending back to me. The PA replaced the airgun and it also had an air leak, this time 20% per day. This time I removed the air cylinder and cleaned the receded 'O' ring and area around it with a silicone greased Q-tip. This fixed the leak and it has held full fill for over two weeks now. Accuracy is great and the airgun meets spec out of the box using 7.33 eXcite wadcutter pellets: Max Velocity was 678 fps Max and 667.3 fps, average fps at 7.48 fpe. Using 8.64 H&N Filed Trophy Sport domed pellets, Max Velocity was 623 fps and Average was 616.9 fps at 7.45 fpe. With the accuracy and shots per fill count, this will be one of my main 'plinking' shooter for the future. Great buy at an unbeatable price.