Page 2 of 2 - Reximex RPA Reviews

This is an attractive and well-made airgun for the price. Very solid build with blue laminate grips. I added a CVLife Red Dot sight and found myself hitting tight groups at 15 yards. Shot count per fill was very good, using 7.33 H&N eXcite Econ II Wadcutter pellets. I did 82 shots and still had lots of air to spare. I suspect over 100 shots per fill would be realistic to expect. Love the blue grips.

I found the trigger pull a little heavier than I would have liked. Mine measured 3.7 pounds. There is a trigger adjuster but that only addresses the pre-shot travel, rather than the actual trigger pull. However, the break point is pretty smooth so it might was not a problem for me. I would also like to have had a choice of barrel shroud colors to match to my blue laminated grips. I was able to order one from the UK to further dress up the airgun.

My first delivery on my RPA had a 30% per day air leak, so I returned it for repair or replacement and had PA do an air leak test before sending back to me. The PA replaced the airgun and it also had an air leak, this time 20% per day. This time I removed the air cylinder and cleaned the receded 'O' ring and area around it with a silicone greased Q-tip. This fixed the leak and it has held full fill for over two weeks now. Accuracy is great and the airgun meets spec out of the box using 7.33 eXcite wadcutter pellets: Max Velocity was 678 fps Max and 667.3 fps, average fps at 7.48 fpe. Using 8.64 H&N Filed Trophy Sport domed pellets, Max Velocity was 623 fps and Average was 616.9 fps at 7.45 fpe. With the accuracy and shots per fill count, this will be one of my main 'plinking' shooter for the future. Great buy at an unbeatable price.

Quality is good, fit and finish is good. The pistol feels good in my hand with good balance. I'm looking forward to shooting this pistol more. Great for small game and general plinking.

At this point in time I wouldn't change anything.

Purchase was easy and straight forward. Delivery took relatively short amount of time from purchase date.

looks, accuracy, build quality.

not much.

I waited almost 4 months for this bad boy, I'm glad i did.

Looks

I was told Pyamyd fails to inspect guns, they just ship them out as Pyramyd receives them. I would inspect all products from outside the USA. before shipping them to customers. This would save a lot of time and money and angry customers.

Just purchased a Reximex PCP pistol. The first one I sent back for chipped bluing on the air cylinder. The second one the air cylinder leaks. I will ask for money back. I cannot be the only customer that has issues with this gun. Maybe Turkey isn't the best place to buy their products.