JTS Airguns Brawn Reviews

Good-looking rifle.

Make it so you can put a moderator on

The Thread Protector on the end of the Barrel cannot be removed to install a moderator. That fact is nowhere to be found, and Pyramyd dose not tell you when you purchase the gun. I was told that if I wanted to solve this problem, I would have to call JTS and solve it. Horrible customer service.

I got the .30 cal. Very Quiet even without the M18 x 1 moderator. Looks good The hammer spring was adjusted to all the way in , and then 1 turn out. Very accurate with the 54g H&N HP II Slugs. Comes with a reseal kit. (You will need it)!

Very troublesome rifle. Lots of problems from the gate. The side lever broke the cheek piece when cocked all the way back , and JTS did send another one , but I had to make a notch in it , so it would work. Fighting an air leak right now. Fun to shoot when it's holding air. Needs to go back to the drawing board too many issues. I whish I had never made the purchase.

If you buy this be ready to work on it.

Weight balance is excellent for off hand shooting! Accuracy was excellent! Just a lot of fun to shoot!

Nothing

Get a high riser, I have 1.5”, to mount the scope so when you shoulder the rifle you can acquire vision through the scope with ease,

The overall feel of it, the wood stock is nice, the power can be felt with each shot.

Make the reg externally adjustable, Make the hammerspring easier to access, add a single shot loader,

Thec.30 cal version has a max fill pressure of 3500psi and the reg is set at about 2400psi (unless mine is a fluke). The heft of the gun really makes it feel as if it will not have any recoil. It does. Just enough to make offhand shooting challenging. This one id definitely not your typical brush gun. Youll definitely want to add a sling if you want to go tromping around the woods with it.

Nothing

Extremely hard to set up a scope on this gun ! Leaked from day one ! Would not buy again

Day I got it shot one time started leaking, filled up one more time drain the tank waited a couple days filled up held air for two days and started leaking again no Bueno

The .25 cal boasts Extreme accuracy. Precise. Hardy build. Does NOT leak at all. Will shoot keyhole groups at 25 yards with cheap 25 grain cro magnums Smooth all metal action.

A bit heavy, needs slings swivel at least, but some practice will suffice for hold.

just do the 10/10 and the leak test. It is well worth the reassurance of quality for a small cost and outstanding performance. Mine shipped with 3000psi and I received it with a remaining 3000 psi. Just buy the brawn, it is worth it friends.

Beautiful, Accurate, Refills in less than 5 minutes with compressor.

Cylinder meter is upside down when oriented to shooter.

Barrel cap will Not come off to add a silencer, it is very loud.

Accuracy. Very accurate with pellets no slugs in .30. Great rifle no leaks.

The 30 cal has stock m14 not 1/2 and as stated product misprint. Donny FL adapter needed for silence. A little heavy but nice wood stock.

Once again the .30 JTS brawn isn't 1/2 but rather just like the aircuda with m 14 threads.

The one I received has had no problems whatsoever. No issues with accuracy or leaking. The all metal magazines were tight at first, but broke in great. No cycling or loading issues, side lever works good.

Maybe shave off some of the weight, but nice to have everything wood and metal, just feels solid.

I haven’t had any of the issues as other reviewers. That being said, take advantage of Pyramids services, they are too cheap not to add on to save yourself some time incase something does go wrong.

Accuracy , consistent shots .

Almost everything

This was just about the worst pcp Iv ever owned , It distroyed my $200 moderator the pellet didnt even come out of the end It was that bad ( I think JTS should reimburse me for a new one ) , Did not de cock potentially dangerous , the straw that Brock the camels back was It blew the O ring from out of the barrel . I returned It to PA for a refund .
JTS shout have fixed the clipping Issue by now Its been a problem since they released the Aircuda range . My advice steer clear .