Page 2 of 3 - H&N Slug HP, .218 Cal. .22 (5.5mm) Cal Reviews

Just harvested some big jack rabbits with them out of Benjamin Akela 22 I also just purchased from you .

due to their size I was able to use them in all my air guns including my Ataman AP 16 which has a small magazine . They were both accurate and hit like a sledge hammer .

nothing

get both sizes and see which one gives the best speed and accuracy in your gun.

I like the screw on tin with foam .

No

It will not feed in my FX .22/impact MKII 28 round cartridge, I have ordered a single shot tray to give them a chance to show how they perform on paper .

These slugs are very easy to load. They just drop into the barrel fully, no pushing. I have not done any bench testing, just resting against my porch posts. These are the most accurate pellets Ive used. I'm getting about 1/2 inch groups at 30 to 35 yds.

Nothing.

They are very small,short and compact slugs. I love the fact H&N puts foam in the tin for these.They are coated in this strange powder and oil,they aren't grey like lead usually is they are blueish. Makes them very slick. They shot pretty well in my 26ft lb maximus, 1400 psi 30 ft lb gauntlet, and 16ft lb crosman 1322 but None of my Springers shot these well,they were not a tight fit in the barrel.

I would like to see the hollow point enlarged more they are really small and shallow also make different designs like hollow base boat tail deep cup bases. Price is high when jsb slugs are cheaper and have better HP,at least make 250 count tins to account for the price

I shoot these H&N 21gr slugs the most out of my modified crosman 1322 pistol with great results,my gun has a steel breech, 14.6in barrel,enlarged flat top valve and solid brass piston, boss transfer port, stronger hammer spring with power adjuster, hollow bolt probe and stainless steel pivot pin. My gun can handle extra pumps and dump all its air, so at 20 pumps my 1322 shoots them at 595 average for over 16Ft lbs and I get great consistency and accuracy with them out to 40 yards, easy 3/4" groups all day. Haven't pumped past 20 yet or shot past 40 yards but they do excellent in this little pistol so don't hesitate to try them out in many different guns you never know what they might shoot well out of.

Very Accurate I shoot these through my Marauder in .22 great results at 25 yards.

Nothing

Extremely accurate and velocity very consistent.

A lower price would be great, but I'll buy them regardless.

My airgun is an FX(TM) Streamline PCP rifle and I have to say that it really likes these H&N(TM)slugs, more so than the FX(TM) 16 grain diabolo pellets that I used for comparison. I chronographed a 10-shot string (average 784 fps, 12 ft. from the muzzle) and, yes, the 21 grain slugs were roughly 100 fps slower than the 16 grain pellets, but I couldn't see any difference in point of impact at 25 yards. More significantly, the slugs produced much tighter groups at 25 yards. So, for perforating metal cans, I'll use the pellets because of the price, but when accuracy really matters, I'll use the slugs...and I can hardly wait to try them at 100 yds.

shoots good and very accurate

fill tins to 250 count or lower the price

Make sure your gun is shooting at least 900fps, will drop rabbits with ease, didn't see an exit wound so i guess it expanded well with a head shot

Well made and consistent size and shape. Use it in my Crosman 1322 pistol. It is extremely accurate and a blast to shoot.

Would like to see the price come down a little bit but will still buy it if it doesn't.

I will mention that I added a steel breech to the pistol. I don't know if that affected the accuracy or not but as I said in the review I have no problems at all with them.

these are uniform and oiled. Shape a size very consistent. Fit very good in my disco.

Noting.

My disco was grouping them around the size of dime at 20yrds. Very pleased with them.