Page 4 of 18 - JSB Match Diabolo Exact Jumbo .22 (5.5mm) Cal Reviews

Heavy. Exactly what I wanted and needed to use in my Hatsan Bullboss in 22 cal. I am pushing these pellets out at 859fps equating to 42fpe. Extremely accurate and definitely hard hitting. I own all 3 calibers of the Bullboss and use only JSB monster pellets in them due to accuracy and reliability of these pellets.

No change to the pellets, just wish these could be had at 500 a tin and priced accordingly.

These pellets are for high powered pcp rifles to attain the most out of what they can give you. Running them at lower power in my opinion is a waste of pellet and time.

Shot great, but you need a powerful gun to start with.

Bigger cans to hold more ammo. Screw top lid.

Difference in my gun between the JSB 18.1 and the 25.4 pellets was over 100 FPS.

I really like the knock down power with the heavier pellet squirrels drop fast ..Im shooting a Hatsen 22long its very accurate with 25:39 at 80 yds Im getting 1.5 groups also notice with.a heavier pellet my hold over is less in the wind

500 count tin and a little cheaper

My Hatsen 22. Long loves this pellet hands down the most accurate at longer distances

Fills out the available volume nicely, with a bit of dome, a bit of hollow tail, a bit of diabolo, and a maximum of lead. Good size consistency. Offers the mass needed for Magnum guns, to keep the speed down below the trans-sonic disturbance zone. Retains power well at long distances.

Do not deform significantly on impact; but thats true of most any massive lead pellet.

Shoot well out of my RAW HM1000X. Product arrived in good condition and is a good buy for the money.

Weight of the pellet in wind

Nothing

7/10 touching at 15 yds using a Gamo Urban. The pellet vertically strung the group as psi dropped on each shot, see photo of orange 2 inch target. So the pellet might be too heavy for current power tune

One hole wonders. I use this pellet in my Prod for short distance shots. Major impact!

Accuracy out of my Marauder. Consistantly better than 0.5" at 25 yds off of a bag rest. Many groups better than 0.25".

Tight fit into the rotary magazine, so just a tiny reduction in length would be appreciated. I am always concerned that the skirts will be damaged on loading.

Lot's of knockdown power in 22 Cal.

Replace all Old Design with New Design

Make sure you know if you are ordering the Old Design or New Design

Design and good impact of pellet- based on weight is really good.

Might be a little lighter for more distance but overall- very good.

Easy loading 22 cal. pellet and good weight distribution of pellet.