Removable vertical scope stop pin is on one of the rings
Roll over image to zoom in
1-year limited warranty
Earn 38 Bullseye Bucks
List Price $42.50 Save $4.55 (10%)
other products by Beeman
and share your thoughts with other customers
Things I liked: I like everything. especially the the quality made in Germany.
Things I would have changed: Nothing
What others should know: These scope rings fit rock solid on any air gun. I use them on magnum Springers and pcp's with no issues
Things I liked: Being able to fit from 9.5-11.5 mm dovetail is good. Having both sets of allen wrenches was helpful. They arent overly heavy but seem very sturdy,
Things I would have changed: I am not very optimistic about only using a pin and not a set screw for the stop pin. Time will tell. Not having grip tape on the top rings makes me rethink my purchase. I have 2 Crosman Nitro rifles, 1 in .177 and .22. The whole idea of these rings was to hold the scope in place.
What others should know: Use a zigzag pattern as you tighten the caps. Go slow, and try to make sure the gap you have between the base and the top ring cap are the same on both sides. Nothing much worse than to get the scope all level and snug only to realize you squeezed the tube.
Things I liked: Good quality
Things I would have changed: nothing
What others should know: A little blue Loctite on base is essential. Don't forget to install the lock pin and make sure it fits in the back of the hole in the barrel
Show Other Reviews and share your thoughts with other customers
what is the height from top of base to inside bottom of ring?
3/4 of an inch.