Special tape inside the rings keeps your scope tight without excessive clamp pressure!
Roll over image to zoom in
and share your thoughts with other customers
Things I liked: Very good product.Have one mounted on 2240 w/ after market steel breach for a short rifle scope.Works very well.I'm going to use this one to mount scope on 45cal. Sam Yang to keep scope back from breech.
Things I would have changed: Nothing,its very sturdy-well priced and works great.Corrects a little scope instilation problem and allows a broader range of optical devises to be used.
What others should know: If it doesn't solve your problem you can always return it.One thing thats a real big plus for this company is how good they are about returns.
Things I liked: Welll made mount. Works for the Sam Yang 909S. Is the right mount for the compact 3-12x44 Leapers Tactical Compact scope.
Things I would have changed: Make it taller so you can use it for the full size leapers scopes(30 mm) so you can put a full size scope on the Sam Yang 909S
What others should know: If you plan to set up your Sam Yang 909 with a compact scope....this is the mount you need.
Things I liked: This offset mount solved a very tricky problem for me. This mount put the scope exactly where it needed to be to attain a proper eye relief with my chosen scope a new UTG Swat short scope,that I put on a hot rod Ruger 10/22.
Things I would have changed: I wanted to make sure mount was as rigid and solid as possible. I drilled and tapped the mount to add a extra mounting screw between the two existing screws. If I were putting this mount on a hard kicking magnum air rifle. I would have added two extra screws.
What others should know: I wish UTG would make a line of these offset mounts in different heights and offsets. Also these mounts are too good not to made for Weaver/Picatiny rails. Currently these mounts are only available for 22/airgun rails. Thanks, Sparky
Show Other Reviews and share your thoughts with other customers