Roll over image to zoom in
Lifetime limited warranty
Earn 19 Bullseye Bucks
List Price $24.00 Save $5.05 (21%)
and share your thoughts with other customers
Things I liked: WELL MADE
Things I would have changed: nothing
What others should know: I tried a different mount at first, but found I needed one that compensates for droop, this mount does. I put this on my Diana 56 and it has not moved or come loose. I shoot almost everyday, and I've put around 1500rounds thru it.
Things I liked: Perfect for shallow cut rails . I love this adapter for the FWB330S and the DIANA 75 10 METER GUNS
Things I would have changed: NOTHING
What others should know: I prefer the weave rings
Things I liked: Fixed my problem.
What others should know: As a new air gunner I had no clue about barrel droop. I bought a .25 cal Hatsan Torpedo to deal with a raccoon issue in an area where I couldn't discharge a firearm. I put a cheap scope on it, but was 5" low at 25 yards, with the vertical adjusted all the way up. I did a little research and mounted a Leapers UTG 3-9x40 AO True Hunter, on this Drooper Rail. Dead nuts, now. The only problem is that those damned raccoons have migrated and all I've been able to shoot are old CDs, beer cans, paper targets, old computer mice and keyboards, etc. I had no clue how much fun I would have with that. I've put several hundred pellets through the gun with this set up and zero is still zero. Anyway, if you're having an issue of being turned all the way up, and still shooting way low, this guy will fix the issue, while providing a rock solid base for your scope.
Show Other Reviews and share your thoughts with other customers
My Diana has 18 inches of droop at 12 yards. And 12 inches to the right. Any suggestions?
I have a Benjamin Bulldog and just purchased a 6-24x50mm AOL Scope. It came with mounts of 3/8 or 5/8in. I believe the height is 30 mm, as it does not specify in the manual or the box. The length of the scope is 410 mm and a weight of 680g. The Scope does not clear the rail on the Bulldog with these mounts. I know that Benjamin recommends 37 mm mounting rings. With this rail being 11mm plus the rings that came with the scope being 30mm, that should put my scope at 41mm in height. That said, will the additional 4mm in height cause problems with the accuracy and sighting of the scope. I do have a Laser Bore sighter which makes zeroing a scope much easier.
I ordered one of these for a Dianna 34P .22 and some UTG Max-Strength-Picatinny-Scope-Rings. Do I push the rings to the front or rear of the slots in the mount before tightening?
Personally on this or any Weaver or Picatinny mount I move the front ring forward & the rear ring rearward. It always works for me.