Date: 17/6/2019 5:59
Airgun Hunting is Legal! Check to see what is allowed in your stateLEARN MORE

UTG Sub-Compact ITA Red/Green Dot Sight, 30mm Tube, Weaver/Picatinny Mount

4.511 reviews
UTG Sub-Compact ITA.

Roll over image to zoom in

Consider the following similar item(s)

  • Red/green dot sight
  • 1x magnification
  • 34mm objective lens
  • 30mm tube
  • 1/2 MOA (1/2" click value @ 100 yds)
  • 4 MOA dot
  • 60' field of view @ 100 yds
  • Flexible eye relief
  • 28mm exit pupil
  • 7.5 oz.
  • 3" long
  • Incl. 3V CR1620 lithium battery, hex screw, 2.5mm Allen wrench, flip-open lens caps, cleaning cloth & manual

    Other features:
  • True strength
  • Adjustable illumination knob
  • Integral quick-detach Weaver/Picatinny mount with Lever Lock
This is a very tiny dot sight! In fact, most lasers are longer than this dot sight. This UTG dot sight will fit just about any pistol or rifle, no matter how compact, as long as it's got a Weaver or Picatinny rail. Suitable for air rifles, air pistols, airsoft guns and firearms.

Item Code: SCP-DS3028W [PY-A-3897]
youTube video

other products by UTG > UTG

Average Customer Review

4.5 (11 reviews)
3 star2 star1 star

Create an online review and share your thoughts with other customers

4.0 4.0

5.0 5.0

By t.b.c. from USA on 2016-05-19
See all my reviews
Was this review helpful?
0.00 ratings

Things I liked: Size

Things I would have changed: Have 1 dot, not the 4 or 5 that compose the dot .at rifle sight distance the dot is usable, at arm's length ( like on a pistol mt. ) it is not usable, the dot covers a 10" paper plate at 35yards. I had high hopes for this unit to use on my heavily modified 1322 .

What others should know: Not for arm's length sighting, like a pistol.


5.0 5.0

5.0 5.0

By Anthony from USA on 2016-02-28
See all my reviews
Was this review helpful?
5.01 rating

Things I liked: Easy to attain an on target zero with pistols. Sight picture is great. Dot adjustment is good. Works very well on a Crosman Vigilante and the Gamo P-85 Tactical. The quick release lets me easily change between guns with minimal re-zero necessary. As with all air guns and accessories, regularly checking fasteners to make sure they are secure is necessary.

Things I would have changed: Nothing.


4.0 4.0

4.0 4.0

By Herman from USA on 2015-10-16
See all my reviews
Was this review helpful?
5.01 rating

Things I liked: The sight is well made for the price . The dot intensity ( both red and green ) can be adjusted from low to high for low light and bright sun light . Adjustments for windage & elevation are precise and easy to do with the knobs . No screw drivers or coins required . My sight came with flip up lens caps even though they are not shown in the catalog photo ? I checked the model # on the box and this IS the sight I ordered . Lens caps fit well and are of good quality .

Things I would have changed: I would like to see this sight available without the quick detach lever to secure the sight to the mount base . It is very hard to zero this sight on the initial zero of the air gun . The hex set screw that locks the quick detach lever down fell out completely after 10 or 12 shots even when snugged down tightly . I was chasing shot groups all over the target . After I figured out the sight was loose I tightened the hex screw down after EACH shot and was able to zero my pistol . After getting the pistol zeroed I used lock tite BLUE to secure the sight to the mount base .

What others should know: I shoot this sight on a Browning 800 Mag. pistol in .22 cal . This pistol has DESTROYED two other red dot sights . I had a mount for a Rem. 700 center fire rifle drilled and tapped , plus two stop pins installed on this pistol . I did not have enough slots to have proper spacing to mount a red dot like the UTG 30 MM ( SCP-RD 40 RGW-A ( PY-A-651 ) sight that uses TWO Weaver type screws . If I were to use a red dot on a hard recoiling air rifle I would go with a sight that locks on the mount with two screws not a quick detach lever . Since lock tite has been used to secure the hex screw in place the pistol appears to hold zero ? Be advised the quick detach lever if released accidently will cause the sight to fall off the gun instantly . I will send another review after 250 -500 shots have been shot .

Create an online review and share your thoughts with other customers.   Show Other Reviews

Got a question? Got an answer?
Log in, then enter your text.

  • Andrew from USA asked:

    One of the listed features is "True Strength". What in Heaven's name does that mean? Is it more than marketing hype?

    • Vernon from USA asked:

      Will this fit a Browning 800 pistol?

      • Tyler from USA:

        Not without a dovetail to weaver adapter

    • Herman from USA asked:

      Will it work on a heavy recoil , like RWS 48?

      • pcp4me from USA:

        According to the description, it will work on every thing, including heavy recoiling firearms!

    See all discussions