WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov See other products by Ataman
Ballistic & Conversion Calcs
The Ataman M2 platform is famed for its incredible build and ability to put shots on target again and again. Now the Russian gunsmiths welcome Ataman veterans and newcomers alike to a shooting experience only Ataman can provide with the Ataman M2 Ergonomic. Built on the proven M2 platform, the Ergonomic features the highly-accurate Lothar Walther Barrel, sturdy sidelever action, and 2-way adjustable match trigger set into a contoured thumbhole stock so comfortable it warrants the Ergonomic namesake.
A quick glance of the Ergonomic shows Ataman’s focus on building a PCP rifle with everything airgunners want from its smooth sidelever action to its aircraft-grade aluminum cylinder. This tried and true design provides you with more shooting time and less reloads thanks to an integrated regulator in its 4,350 PSI (300 BAR) cylinder designed to deliver incredible shot-consistency. Above the barrel rests a long Weaver/Picatinny rail for choosing your preferred optics to zero in on prey.
Available in multiple calibers, the Ergonomic achieves the ideal muzzle energy for shooting far-off targets and hunting small to medium game. In 177 caliber shooters can achieve 22 ft. lbs. of energy. .22 caliber offers 38 ft. lbs. of energy and up to 45 accurate shots per fill, while the .25 caliber version delivers 55 fpe and 35 shots. In .30 caliber, you'll get 20 regulated shots per fill with 95.8 fpe. The .357 caliber option sends up to 11 pellets flying at a devastating 144 ft. lbs. of power.
These features add up to a PCP rife ready to make even more fans of this proven platform by a brand renowned for their high quality, exceptional reliability and cutting-edge technologies.
Helpful resources:
Ataman M2 Ergonomic PCP Air Rifle, Black Soft Touch
See other products by Ataman
Ballistic & Conversion Calcs
| Max Velocity | 980 fps |
| Overall Length | 43.31" |
| Buttplate | Rubber |
| Function | Repeater |
| Weight | 9.7 lbs |
| Scopeable | Weaver/Picatinny |
| Safety | Manual |
| Suggested for | Hunting |
| Caliber | .22 (5.5mm) |
| Muzzle Energy | 38 ft/lbs |
| Loudness | 4-Medium-High |
| Barrel Length | 20.47" |
| Shot Capacity | 10 |
| Barrel | Rifled |
| Front Sight | none |
| Rear Sight | none |
| Action | Sidelever |
| Powerplant | Pre-charged pneumatic |
| Max Shots per Fill | 50 |
| Body Type | Rifle |
| Fixed/adj. power | Fixed |
| Cylinder Size | 250 cc |
| Shrouded | Yes |
| Operating Pressure | 4351 PSI / 300 BAR |
5.0 (1 review)Create an online review
Got a question or answer?
Log in to participate
I have a M2R Carbine that I purchased new rom PA 2 years ago and is functioning fine. Recently it has begun loosing air overnight and will run down to 0 in a couple of days. Tech support was not helpful as the availability to repair technicians seems to be a problem. Does any know if there is a repair video or diagram for O-Ring/seal replacement for this rifle? Or and alternative air gun gunsmith in NE Ohio? Thanks
A regulator set at 150 bar doesn't seem like it could sling a pellet at 980 fps... so the question I should have asked is: Can the regulator be adjusted to a specific setting, and if not, can it be removed completely to say run from an outside regulator as if tethered?
I can tell Mark your a bright one, get that commission yet? 150ft-lbs, yeah real powerful when there's guns doing 2, 3,4,5 and 6 times that and dropping game at hundreds of yards.
Check out XP Airguns, Or PBBA Airguns, Or Western Big Bores. Stay away from Atamans, there junk, my buddy had 3 and they all had problems, scope base machining off, triggers falling apart, shredding "o" rings, sharp edges on fill port, metal shavings and corrosion Inside Air reservoir, leaks, mag Issues. Furthermore the mags can't even hold any decent slugs and the rifling Is only meant for lightweight pellets. There overpriced paper shooters when they work that's all. You want a real nice Russian gun, then Get a Edgun. You want Power then go with a Texan, or a custom made pcp which can be bought for $1400-$2000 and will do a sub 1 inch group at 100 yards and still stack at 200 yards and beyond with slugs designed for hunting that flatten out.
HAHAHA 150FT-LBS IS NOT POWERFUL AT ALL!! What are you smoking bro?! That means at 30 yards you will have less than 5 inches of penetration on flesh and not nearly enough energy for large game which Is what this rifle Is advertised for. Coyotes and small to medium game sure but not beyond 30-40 yards. For that price you could have a custom American made pcp that would do 350ft-lbs In .357, and In .45 and up Would do 700-1100 foot pounds!
The Ataman is very powerful. With the reg at 150 bar it can shoot at 980 FPS. The regulator is factory set, You can not remove it or adjust it easily. A remote regulator will not work without major internal modification. Very costly. It would be all custom work.
What is the pressure the regulator is set at?
Usually around 150 bar.
Usually around 150 bar.
Usually around 150 bar.
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Ataman M2 Carbine Ergonomic PCP Air Rifle, Black Soft-Touch with quick-disconnect connector (1M)
To start over click reset
Tank fill calculator
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
Customer Support
Customer Support
Copyright © 1999-2024 Pyramyd AIR. All Rights Reserved.
By Jon Veltman
I have the .177 caliber-wood stock. The gun is very well made in comparison to many of the others I own. Solid construction with soild material and well machined. Not soft material like FX uses. Shoots very accurately and consistently even after sitting for months.
Things I would have changed:Magazines that were a little less expensive. An externally adjustable regulator or a gauge to help you set it.
What others should know:This airgun is pretty easy to work on and a very solid design. It's accurate and consistent. The barrel is very solid and has little to no flex. The metal used is high grade aluminum. It's a little different to take apart, due to all the pins that hold things in and together. But not difficult once you've done it once or twice. I don't think you'll be disappointed if you buy one.