Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns reviews - page 1

    Add to Cart


    Share on FacebookShare on Twitter

    Average Customer Review

    3.0 (2 reviews)
    5 star:4 star:3 star:2 star:1 star:
    (2 votes)
    Create an online reviewand share your thoughts with other customers
    The most helpful favorable reviewThe most helpful critical review
    0 of 0 people found the following review helpful:

    Overall rating:3.0

    Value for money:5.0

    By David from USA on 2009-08-04 02:30:43

    Things I liked:Rear sight adjustments are positive and repeatable. Knobs work in service rifle directions---clockwise is up or right. Rear aperture is a good size, not too small, nor too large. Clicks are in 0.001" increments as checked with a dial indicator. Sight height adjustments are infinite, i.e., there are no notches that prevent setting the sight somewhere in between marks.
    Things I would have changed:Have an option for a different sized front sight dovetail that will fit the Beeman R1, RWS break barrel guns, etc. Make the height marks a bit clearer, with scribed lines rather than dot matrix type lines. Also make a vernier scale on the sights to allow the repeat of settings without using calipers.
    What others should know:Front sight base fits an 11mm dovetail, not the dovetail on many spring guns. The description that it fits the standard dovetail is somewhat ambiguous. I did make a spacer to allow the sight to be mounted on my Beeman R1 which works nicely. Note too, that the Lyman Anschutz sized inserts do not fit, there is no provision for the ears. Three acrylic inserts come with the sight, however.
    0 of 0 people found the following review helpful:

    Overall rating:3.0

    Value for money:2.0

    By John from USA on 2011-07-26 16:37:22

    Things I liked:Very accurate and easy to use. You can acquire a target very fast.
    Things I would have changed:The rear aperture had a burr that didn't affect the function but was very irritating. For the money it should be higher quality.
    What others should know:If you are shooting from a bright area towards a shaded area forget it. The target has to be very bright for this sight or it is useless.
    Sort by:
    • Show:
      Items
    • Overall rating:3.0 3.0

      Value for money:2.0 2.0

        By John from USA on 2011-07-26
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Very accurate and easy to use. You can acquire a target very fast.
      Things I would have changed:The rear aperture had a burr that didn't affect the function but was very irritating. For the money it should be higher quality.
      What others should know:If you are shooting from a bright area towards a shaded area forget it. The target has to be very bright for this sight or it is useless.
    • Overall rating:3.0 3.0

      Value for money:5.0 5.0

        By David from USA on 2009-08-04
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Rear sight adjustments are positive and repeatable. Knobs work in service rifle directions---clockwise is up or right. Rear aperture is a good size, not too small, nor too large. Clicks are in 0.001" increments as checked with a dial indicator. Sight height adjustments are infinite, i.e., there are no notches that prevent setting the sight somewhere in between marks.
      Things I would have changed:Have an option for a different sized front sight dovetail that will fit the Beeman R1, RWS break barrel guns, etc. Make the height marks a bit clearer, with scribed lines rather than dot matrix type lines. Also make a vernier scale on the sights to allow the repeat of settings without using calipers.
      What others should know:Front sight base fits an 11mm dovetail, not the dovetail on many spring guns. The description that it fits the standard dovetail is somewhat ambiguous. I did make a spacer to allow the sight to be mounted on my Beeman R1 which works nicely. Note too, that the Lyman Anschutz sized inserts do not fit, there is no provision for the ears. Three acrylic inserts come with the sight, however.
    Shop at Gun Mall
    Back to Top