Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI reviews - page 1



    Share on FacebookShare on Twitter

    Create an online reviewand share your thoughts with other customers
    The most helpful favorable reviewThe most helpful critical review
    1 of 1 people found the following review helpful:

    Overall rating:5.0

    Value for money:5.0

    By edgar from USA on 2011-11-15 23:39:36

    Things I liked:Basic simple design.It works on my Marauder.
    What others should know:Add teflon tape to the treads to reduce the possibility of any air leaks.
    0 of 0 people found the following review helpful:

    Overall rating:1.0

    Value for money:1.0

    By Joel from USA on 2013-10-07 13:09:14

    Things I liked:Nothing
    Things I would have changed:Whatever it takes to make it not leak
    What others should know:Buy the $25.00 one-it's plated to resist rust & made super heavy-duty!
    Sort by:
    • 123 Next »
    • Show:
      Items
    • Overall rating:1.0 1.0

      Value for money:1.0 1.0

        By Joel from USA on 2013-10-07
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Nothing
      Things I would have changed:Whatever it takes to make it not leak
      What others should know:Buy the $25.00 one-it's plated to resist rust & made super heavy-duty!
    • Overall rating:4.0 4.0

      Value for money:4.0 4.0

        By ken from USA on 2013-10-04
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Simple and easy to use.
      Things I would have changed:Nothing works great
      What others should know:Nope!
    • Overall rating:1.0 1.0

      Value for money:1.0 1.0

        By Robert from USA on 2013-09-22
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Seems to have solid construction.
      Things I would have changed:Test it before shipping
      What others should know:This product started leaking air on first use. Double checked tightness and tried again, leaked again. I am going to check the website for hill handpumps and see if they sell a foster adaptor since its a hill pump.
    • Overall rating:4.0 4.0

      Value for money:4.0 4.0

        By Abel from USA on 2013-09-07
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:good fittings, works well!
      Things I would have changed:May be made of stainless steel!
      What others should know:this really fits and works fine , always put the tread tape. so it wont leak...
    • Overall rating:1.0 1.0

      Value for money:1.0 1.0

        By WilliamG from USA on 2013-08-25
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Nothing
      Things I would have changed:Sell a better quality
      What others should know:This QD failed on the first use. We had to struggle and pry to get it off the gun. To their great credit, PA immediately refunded my money and I bought another QD from a different vendor.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Eddie from USA on 2013-08-23
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:What can you say it works. A little stiff but it should be easier later.
      Things I would have changed:put a small strip of teflon tape in the package
      What others should know:none
    • Overall rating:4.0 4.0

      Value for money:2.0 2.0

        By imjaybird from USA on 2013-08-19
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Works well.
      Things I would have changed:The price is high for what it is, sticks every noe and then but a little silicone keeps it smooth.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Theodore from USA on 2013-08-12
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:It works.
      Things I would have changed:If it isn't broke do nothing.
      What others should know:Tapered threads no tape needed.
    • Overall rating:5.0 5.0

      Value for money:4.0 4.0

        By noel from USA on 2013-07-27
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:This is a top of the line fitting that is easy to use.
      Things I would have changed:Some type of coating or plating would be nice.
    • Overall rating:3.0 3.0

      Value for money:1.0 1.0

        By tworr from USA on 2013-06-10
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Fits the Air Venturi Microbore Hose and uses less air than my Hill pumps stock hose.
      Things I would have changed:Offer it with on the microbore hose and adjust the price down.
    • Overall rating:3.0 3.0

      Value for money:2.0 2.0

        By Po from USA on 2013-05-26
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:It's a QD fitting and it works, when it feels like working.
      Things I would have changed:I have to wiggle it a bit to secure it to the Air Force Spin Loc tank to get the seal going then it's good all the way. There were times when I had to wiggle it many times and the air keep leaking out from the QD side. It's a Quick Disconnect but actually I have a hard time to "connect and disconnect" every time. Better QC would be nice.
      What others should know:It gets the job done but the quality could be better for the money you spend on it. The QD is not smooth fitting and the BBs around it could almost fall out if not careful. I did have to use the Teflon tape to secure it to the 1/8 BSPP connection for the Hill pump. With the Air Force Talon SS I actually installed the Spin Loc tank with the QD nozzle pointing down to about 4 o'clock so the fitting goes on right without the hose bending too much from my Hill pump and I can read my tank's air gauge better now it points up to my eyes.
    • Overall rating:4.0 4.0

      Value for money:4.0 4.0

        By Zak from USA on 2013-05-16
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Well made adapter. Thank goodness for quick connectors
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Zac from USA on 2013-05-07
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Great quality built solid
      Things I would have changed:Nothing
      What others should know:Its a flare 1/8 conection so if thers some kina leak from the threads it may need to be tighten a bit do not use teflon(plumers tape/thread sealant) a flare fitting is not ment for that, make sure its clean be for you put together onto pump this will help insure seal.
    • Overall rating:4.0 4.0

      Value for money:4.0 4.0

        By Paul from USA on 2013-05-04
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Works well with the Air Venturi I purchased to fill my PCP rifles
    • Overall rating:4.0 4.0

      Value for money:4.0 4.0

        By Unknown Infidel from USA on 2013-05-04
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:I bought this out of necessity. I let a friend borrow my Benjamin pump and he brought it back with a different hose on it since he had destroyed my original hose by slamming it in the car door. So in order to use mt pump again I had to buy a fitting so it would connect to my guns again. I wasn't happy about this. My first one I ordered would fit my discovery but try as I might it would not fit my condor. I told pyramyd air about the problem and they sent me another fitting that worked with all my guns. Evidently my first one was out of spec from the factory.
      Things I would have changed:The factory that makes these (I'm assuming it is in China due to poor quality control) needs to learn quality control and apply it since these are a precision high pressure bearing fixture that has potential to hurt someone if they fail at high enough pressure.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Tyson from USA on 2013-04-26
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Easy install on Hill Pump. I like the non reflective color.
      Things I would have changed:Nothing.
      What others should know:First few connect/disconnect cycles were a little tight on a brand new qick fill. After a few fills, it is all smoothed out. Nice audible "click" when fully connected.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By David from USA on 2013-04-23
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Quality construction. Does what it's supposed to do.
      Things I would have changed:Nothing
    • Overall rating:1.0 1.0

      Value for money:1.0 1.0

        By Dale from USA on 2013-04-09
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Price is reasonable. But I would rather pay for quality.
      Things I would have changed:Better machining and/or quality control so it would work.
      What others should know:Function is so sticky it doesn't work, unless you push-turn-wiggle and shout at it. Didn't get any use out of this item. PA should offer an alternate quality item.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Edwin from USA on 2013-03-24
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Its verry mooth to release and snap together
      Things I would have changed:nothing
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Michael from USA on 2013-03-19
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Works great.
      Things I would have changed:Nothing
    • 123 Next »
    Shop at Gun Mall
    Back to Top