UTG New Gen 80mm Add-On Reviews

Was able to open bore to make fit my hawke.great quality..allows me to adjust parralex much easier..

O

Can't go wrong with this product

Solid construction, finish, fit. The 80 mm wheel is just the right size for my rifle/scope combination. Rifle is a Benjamin Marauder Field & Target with a UTG 3-12 X 44 True Hunter Classic Scope with 30 mm tube and mil-dot reticle. This scope has the side wheel parallax and works great with the 80mm wheel. It does not get in the way and has markings on the outside of the wheel for yardage. It also has 2 Allen head set screws to hold the wheel in place, it also has groves in the shaft that match the side wheel parallax cap to make positive contact and adjustments. The finish is mat black with laser etched yardage numbers that are filled with white so it is very easy to read. This is a great addition for the scope.

nothing at all.

The reason I wanted the side wheel is because the turret for the parallax adjustment was quite stiff. It will stay where you put it. This wheel makes it so much easier to use the focus on the side of the scope. To me, the side adjustment is much easier to use than the adjustment on the front of the scope.

Easy installation specifically for SWAT scope. Entry level FT equipment

Nothing, even comes with appropriate sized allen key

Good product great price

Nice tight fit. Easy to install.

Larger numbers or full flat dial face for adding calibrated tapes.

This one is a good size that doesn't interfere with left side magazines on RAW 1000x.

I have several of these and the best thing they have going for them is the price. Pretty good side wheel for the money.

The mounting system with the rubber bushing totally sucks. COME ON UTG, YOU CAN DO BETTER THAN THIS !! Fortunately I have a lathe, so I can make aluminum split bushings to replace the awful rubber bushing.

Very poor mounting system.

The numbers on the side wheel N scope matches and its very easy to see.

None

If I have one more scope and for that price I would order another right away.

Its a perfect fit for my leapers 6-24x56.

None

None

Worked perfect on my Athlon Talos BTR 4-14 scope. It does not need any modification and fits like a glove. The edge of the wheel also doesn't stick up past the scope turret, allowing me to still easily put the airgun away in its case.

I wish there would have been 3 or 4 grub screws to tighten this scope down. While it fits snugly and will not fall off, it can wobble slightly.

I haven't tried, but I am assuming that this wheel, along with the other two wheels made for the AccuShot SWAT scopes will fit the Athlon Talos BTR 4-14 perfectly as well. There is no information on the internet that I could find about this, so I hope this review helps other people in my position.

works good

extra screws

works nice with UTG swat

Nice wheel. Bought it for an accushot OP3 but would not fit.Turrets have different nubs on them. It can be fit without a lot of work. Yardage lines up.

adaptable rubber center to fit all there scopes.

Works great.

Great add on way easier to use.

Add another set screw or 2

Love the fine adjustments it allows me to make. When shooting an X ring smaller then the diameter of the projectile a sharp image is a must.

Nothing

Make sure you have sufficient clearance between your rings for size of the wheel you choose.

Never having a wheel I didn't realize what I was missing. It makes focus adjustment a breeze while looking through it.

Nothing to change it is an does what it is supposed to do

It makes focal adjustment a breeze. Well worth the small investment.

Ease of use while focused on target.

Perfect for Field Target

Fit like a glove. Much easier to adjust scope with wheel in place

It makes adjusting much easier, and also looks real cool. It is a little wobbly side to side because of the rubber connection. I wish it would be metal to metal fitting. But so far it works great.

metal to metal fitting would be nicer instead of the rubber fitting.

machined well

it needs a better mounting system moves to much not a big fan of this

I like the wheel, makes adjustments faster and easier and can notice the yard marks easier with it but the mounting needs to have at least 1 more screw. 4 would be best. The 2 that it has doesnt keep it from moving laterally while on turret. Feels as though it could be knocked off and if you tighten screws too much they will eat into turret

Mounting points for grub screws, add more to make mounting balanced and firm

Worth the money, is convenient.

Easy to read and install

Nothing

I have bought two of these wheels for two different types of UTG scopes. The yard marks match up on both of the UTG scopes.

The rubber ring seems a bit "squishy", but this is a good thing as it prevents light bumps on the wheel from stressing the scope.

With a bit of careful grinding, it will fit a BSA scope as well. The lip which holds in the rubber ring needs to be removed first. The yard marks will not match up with the BSA scope, but then, who would expect it to?