Umarex SA177 CO2 BB Pistol Magazine, 16rds

I can get twenty of my 4.5mm copper BBs into this magazine. Now that I have three, it's a quick way to really open up my target shooting experience with my SA177 pistol. Low price, good weight, and plenty of shooting.

Maybe it should be a little bit heavier in the base plate.

Once loaded, don't play around with it. If you hit the little button part on top the BBs will spill everywhere and you'll be chasing them all over. :)

Easy to load with the spring lock and hasn't jammed once on me. Fits in the SA117 perfectly.

The bottom is a little flimsy being made out of plastic and if dropped would probably break.

For some reason the mag that came with mine broke after 2 days of use. Although the spare I ordered from Pyramyd Air worked a lot better.

This I believe is an OEM part for the SA177. it functions as it should, and does the job nicely. It's metal where it counts, and is no different then the original.

With that said. you only get one per package. This is major disappoint, the replacement clips are expensive! Either a cheaper price, or Umarex needs to step up to the plate and offer a twin pack.

One of the replacement mags I purchased actually dropped out from the bb repeater while I was firing! luckily no bb's fell out, I chalk it up to user error, I.E. not making sure the clip was seated firmly.

this thig is the same as the one that comes with the gun it works well fits perfect and never jamed on me.

make them wear out less. after aproximently 6000 rounds or so you need to get a buy new clips

the bottom can seem flimsy but it will never cause any problems.

Well built and solid. Matches the original.

Nothing

Works in the SA-177 with no issues.

The construction of the production is good, (in metal except for the base which is plastic). It is easy to load the bb's, very practical and useful. Each load of CO2 from my pistol SA177 pays to load of five to six magazine. You have more than one magazine allows you to enjoy your assignment of shooting more.

Change the price. Only comes one for packaging. It would be advisable to improve the coupling of the plastic base of the magazine with the metal of the same party or make the magazine entirely in metal. I think that for the price paid by each could do so without increasing the cost.

As the basis of the production is in plastic so you don't have problems at the time of loading the magazine to the pistol I recommend you impulses it in the area of the base of plastic just below the part of the magazine metal, so you avoid that comes off the plastic base of it and will be staying in the using the SA177.