Page 4 - Air Venturi Scuba Tank Yoke Reviews

It fits on my scuba tank with no clearance issues.

Hose is way too short which makes it awkward to fill any PCP rifle. Gauge is too small and I'm not confident of its accuracy. It's simply a poorly designed tool; there are better alternatives but they are twice the price.

Don't buy a charger with a hose shorter than 3'.

It's a very well made item, and easy to use.

I would like to have the choice of a longer hose. Filling a rifle from a scuba tank using this adapter, is a little cumbersome with the short hose.

The only comment I would have is that when filling a gun, do it slowly as high pressure air transfer causes heat.

Good price on the adapter and hose. Easy to install and use.

Why didn't you tell me that it is useless without a disconnect? I could have bought both at the same time and I could be using my Marauder now instead of waiting for the part that I need to get the air into the rifle. It would help if your descriptive in the catalog showed what connections are needed on what airguns.

Buy the quick connect when you buy the scuba tank adapter.

after a couple tightinings of fittings no more air leaks, added the quick disconnect fitting , fantastic worked just fine.

typical scuba tank only holds 3,ooo PSI just like the Marauder rifle, so at first fill up, pressure drops below 3000 and steady there after,but don't get me wrong it can sure save a lot of hand pumping to get the gun up to 3000 PSI.

It 's very sensitive and accurate as far as I can tell.

A longer hose is REALLY necessary. There's no room for positional adjustments. I.E. if you're cradling a rifle in one hand and filling with other and need to even slightly change position, you could start to tip the tank in whatever direction you move. A longer hose makes filling more comfortable.

It does tend to leak a little around the tank seal upward of 2000lbs. I think the O ring (Supplied with the tank NOT this product) doesn't have a large enough wall diameter and isn't getting enough "squish" to make an effective seal. Easy fix.

nice design,

add a longer hose

try to find a longer hose adapter, its hard to find a package deal with options allowing you to get a adapter with a suitable hose for easyer access to air gun fittings

Nice design, poorly executed

All conections leaked badly. I was able to put teflon tape on the pressure guage and tighten it. To tighten the hose it must be attached to a SCUBA tank (no pressure) The bleed screw still leaks like a sieve, but I can fill the pistol even with the leak.

I called to get a new bleed screw and was told they didn't have any and no idea when they would come in. It was suggested that I tighten it with Vice Grips to lessen the leaking

Quality product and well made.

I would like to see a larger pressure gauge. Also the relief valve/screw could be larger.

The hose was not screwed tight to the adapter and I had to reinstall with applying some teflon tape on the threads and tightening the hose to the adapter. The pressure gauge is not very accurate, mine was off by 800 psi.

Fit right onto my new 100 cu ft scuba tank like a glove. Works perfectly.

A longer hose would be better, but I guess in these days of litigation the manufacturer must be concerned that if someone forgets to release the pressure in the hose before disconnecting it from the air gun it could cause some injury.

As others have said; be sure to order the female adapter to fit your air gun.

Pyrmyd price beat the competition, Quality product, connected to my K-valve like it was made for it.

air gauge that was incremented to mmore detail

I like to air my rifle up with the tank. but when i got this, brand new, it obviously was not tested thoroughly, because it leaked air through its air gauge.

If i were the manufacturer of this adapter i would implement some sort of 6-sigma QA. I went to the nearby pneumatic shop and the owner and i ended up taking the air gauge out and plugging, reattaching, no leak. When we took the air gauge out a thread of plastic fell out, he taped the threads and voila, a hassle, but the new $70 adapter works.

THE OTHER ITEMS THAT I HAVE ORDER HAVE ARRIVED ON TIME AND ARE WORKING VERY WELL.

I BELIEVE THAT THE VALVE IS LEAKING AT THE TANK, EVEN THOUGH I HAVE CHANGED THE O RING TWICE. I WILL LET YOU KNOW IF I HAVE TO SEND IT BACK.

YOUR STAFF HAVE BEEN VERY HELPFULL ANSWERING MY QUESTIONS.

Well made product! Quality! (Make sure to order an adapter if you need one!!!)

Little longer hose... quick disconnects on both ends of hose so you can leave on the tank and not have an obtrusive hose flopping around...

Make SURE you don't need an adapter (I did for my Marauder and have to wait another week....)

This is a very good quality product and very easy to use.

It needs a clearance notch to use on certain types of tank valves.

I had to grind a 1/2" clearance notch in order to use it on my tank setup. It was not a big deal since I have a grinder. If you don't then you will be SOL.

Ease of filling a rifle/pistol to 3000psi, works as advertised

Make the hose about twice as long, work on the fitment of the bleeder valve (it leaks),

Be sure to check out your local dive shop to see if they require certification to fill up a tank.

hooks up quick and worked great

longer hose would be nice

buy it works good with adapter

This works very well. I put it right on my SCUBA tank with out any problems.

A longer hose would be great.

It does what it is suppose to.

At least 50% increase in hose length. Include the femal adaptor already attached with plumbers tape for leak prevention and for no additional money. Would have rated it 4 stars if this were the case.

You need the femal adaptor with the Marauder and plumbers tape (white teflon tape) to prevent leaking.

it looks nice

the fit on the threds on the bleader valve so sloppy the bleader wont seal had to add a o ring inside the valve leaked so bad it. it leaks so bad you dont hafto open the valve to blead excess air off, but you dont find this out untill you grind the adpter to fit the tank hence you have a void warrenty but you cant tell it till you put the pressure to it

we bought 2 of them they both leak at the bleader valve screw valve

workmanship good

i would make shure it was all there before i sold it my son and i each got one neather one had the o ring in it

make shure you order o rings for tank adapter and quick disconnect