Page 2 - Air Venturi Single-Shot Tray, Fits Reviews

it works well

a better fit

you have remove from bottom to fit

Works great. I really prefer single shot PCP's over the rotating magazines.

Nothing, just exactly what I wanted.

If you are keeping a rifle around to take care of backyard pests and don't want to leave out it with a loaded magazine, this is exactly what you need.

Nothing

Make it fit!

This item is terrible. It does not fit. The material of construction is inferior. It looks like a big black sugar cube, and is about as functional as one. It will NOT fit into my M-Rod. I have read several other reviews stating as much, and should have stayed away. But I thought I would try this , since apparently Benjamin doesn't make this item anymore for some bizarre reason. This Item Is Worthless. And no, I am NOT going to modify it to make it fit. It should fit right out of the box. This thing is not even worth 3 cents, let alone 18 dollars. It's being returned tomorrow.

I like how well made and solid this Air Venturi is and how the the pellets sit in the cut out grove of the tray.

I would change the dimensions a little because it would not fit initially in my .25-cal. Benjamin Marauder without me trimming the rear of the tray. I would also trim the price as it's expensive with a price of just over $25.

Once you trim the tray to fit your .25-cal. Marauder (if you have this problem), it works as it should.

....the fact that it is available.

The shot tray is made from a hard white plastic like material and then coated in black. Would be better if it were made like the original Marauder .177 trays in black plastic. Also, would have the tray load from the right side, not the left.

The tray I received would not fit fully into the breech. I had to use a flat file to modify the tray so it would slide in. It now works fine, but would not recommend this purchase.

i was told this wouldn't fit, that i would have to do some work on it... not the case with the one i got, fits good, accepts any pellet, real fast!

i can't think of anything to change?

sometimes, a marauder man likes to shoot single shot, this is what you need, its fast, and secure, well made, worth the cost.

Good design, but the finish gets in the way on my 2nd Gen .25 Marauder. I had to dremel down the area where the bolt slides for the entire length of the pellet tray, and had to dremel down the mismatch radius of the relief on the horizontal slide guide as it meets with the radius that mates with the breech receiver. You can see the "bump" in the picture PA uses in their ad. Otherwise it will not slide into place. Even though I had to work the part over, I still really like it. Stays in place and I have had no other issues. Otherwise it would have got 5 stars.

Make it fit out of the box rather than having to modify. If I would have modified it and it still would not have fit I wonder if PA would have taken it back? So either PA needs to research this and see if it is just an issue with the .25, the 2nd gen Maruaders? or if their supplier is having a Quality control issue? They should let you know about the mismatch before they sell them. Some folks may not be as handy and willing to machine the part to fit. Just my 2 cents.

PA are good folks, they asked me to send pics of my issue so they could get in touch with the mfg. So we shall see if anything comes of it. Potential buyers might want to inquire before they make the purchase.

It fits nice and snug. Alignment is good.

Nothing

worked fine after some work

Didn't fit correctly

As others have stated this product may not fit correctly right out of the package. I had to use a dremel to remove some material before it would fit properly.

Allows easier single pellet loads

Needs to be sized correctly as it won't fit in the breach without being filed or sanded down. (Gen II Syn Marauder .25 cal)

May need to modify part before use

the tray works real nice for single shot conversion

I would change nothing

good investment for single shot shooting

Fits well

Price

The single shot tray makes pellet testing easier.

The design works, but was not a perfect fit for my Marauder.

My tray would not line up with my Marauder, its geometry was off. I had to use a dremel tool to get the tray to fit all the way in and then I had to remove some additional matterial from the pellet port, because it was pushing up on the pellet loading probe. After making ten minutes worth of modifications, it works like a charm.