Page 3 - BSA 30mm Red Dot Sight Reviews

Easy to install - easy to use. Good price.

Needs a separate on/off switch.

Fits Weaver & picatinney rail. Red dot fully adjustable. Right on!

Weigh less.

I have come to prefer a peep sight.

Arrived in good condition, easy to mount and very easy to sight in at the range. Acquiring your target is quick and easy. I have it mounted on a Crosman 2240 steel breech. This red dot is a large/heavier piece and should be a consideration when ordering. However, so far, the price point vs what you get is very good. I have only used this mount for about two weeks, I'll have to do more range time to test it's durability.

I would consider reducing the size & weight of the red dot about 30% for pistol use. For rifles it's just about the perfect size.

Easy to mount and zero in.

This product works well, compact and an attractive addition to my real barrel rifle.

Nothing

This is an excellent entry level product for anyone considering a red dot scope. the investment is modest and the reward is great.

Nice scope gets you on the paper quick!

No complains yet.

The dot is great. It works well even during the day at low settings. If the brightness is up too high the dot can get blurry but it's simple to just turn down the setting. I rarely use mine past the 3rd or 4th setting even with 11 settings.

Nothing really. I'm happy with what I got for my money.

Gotta remember to turn it off when you put it down.

Never was able to mount it on my Beeman P3

Operating manual was very difficult to read ...all wadded up in the box, no pictures of front and back, no tios on how to mount, could never get the dot centered .. Not worth my time to return it, I'll just trash it. My first disappointment with Pyramid. Very frustrating

Nice size, simple mounting and easy to use.

Nothing.

Got this sight for my 1322 with steel breech, it's a great combo. I also have the same combo on my 2240. These sights work great and have had on problem.

A perfect match for my 1077 Crosman. Secure mount and right on target.

It would be even better with slight magnification.

Very nice red dot.very accurate on my crossman 1377 pistol.

Small, compact, light, and accurate enough to whack pine cones off trees at 30yds with a 2289 that I know can shoot 1" groups with a 16x scope. So it works. Looks pretty good as well.

The highest light settings basically make the dot useless...just a big blur. But on 1-7 settings (it has 11 of them), the dot is nice and round an clear.

For the price, there's really nothing to not like.

The scope is great but the booklet on sighting in is not correct. It has a picture that the impact is low left , to correct move impact up and right. To correct move both turrets counter-clockwise. But the booklet says counter-clockwise moves the impact to the left instead of right.

Better instructions

Easy to mount. Sights in easily. Really impressed at the quality, for the price.

Could use a brighter, led. In full sunlight, must be set at 11 to see the dot. Package the battery separately. It was showing signs of corrosion.

I mounted this on a Crosman 1322, with steel breech installed. This combination is amazingly accurate, shooting JSB 14.35 and 15.89 pellets. I tried 14.3, Crosman pellets, which were not as accurate. At 10 yds it shot 3/8 inch 5 shot groups. 15 yds, 1/2 in group, and 3/4 in groups at 20 yds. I also added an aftermarket, adjustable trigger spring, that substantially improved the trigger function.

Easy to mount. Easy to sight in and use.

If I could change something it would have to be the off. I think it needs to be more clearly defined that turning it to 0 will turn the unit off. Other than that change nothing else

Great all around for close up to medium 30m ranges.

Simple to mount. Simple to sight in. Simple to operate. Nice to have a wide range of power-to dot size adjustments. Just remember to turn dial to "0" or you'll kill the battery quick

Nothing I bought tow of these.

Don't bother with the that UTG 30MM for $34.95, dot sight is terrible. Buy the BSA 30MM. It's $5 bucks cheaper and you'll be happy.

easy to mount, easy to zero. Must use Loctite on mounting hardware.

change mounting hardware to a better quality

Be careful not to try and over tighten mounting hardware. If you try to over tighten, it will strip out on you. Use Loctite and snug it down

This is my first Dot scope. So far it is easy to use once you make the adjust to not having cross hairs in the view. I like the adjustable intensity for day and night. Its compact and easy to mount.

It would be nice to have some sort of automatic shut off for the batter. Perhaps some sort of motion detector as a shut off or timer to save the batter. Although, the battery is easy to replace and not expensive.

My Red Dot scope came out of the box set on 11 intensity. That meant it was sitting in inventory with the Dot intensity at max and drained the battery. If the scope had a motion detector or timer it would have shut off and saved the battery. Then again, once it began to move during shipment it may have turned on again.

Im 85 and have a slightly blurred vision in my dominant eye. I'm plesently surprised that with this red dot scope, I'm able too still hit what I'm aiming at.

Not a thing

If you are on a tight budget. THIS IS FOR YOU

I bought this sight for my Marauder, and though I was told it would not fit, I found that it did. This sight provided excellent results on the range at 10m. Though the illumination intensity has 11 settings, I found that the 3 setting provided a small, but visible red dot on the indoor range with good lighting.

A second color would be nice.

It took a little practice mounting the sight on the dovetail rails. I found that sight mounted easiest when holding the rifle vertically (muzzle up).