Page 10 - Crosman 1399 Custom Shoulder Stock Reviews

Ease of attachment to the Crosman Pistol. Provides solid support for shooting.

Color to match the Crosman.

I would recommend this to anyone looking to add support for his Crosman Pistol.

Simple, inexpensive, strong.

Adjustment for length, add a simple strap.

Fits pistol very well. Gives rifle experience. Improves accuracy. Improves sight adjustment.

Lower price

Will improve ability to shoot 1377 as a pistol as well.

Delivery was prompt and the cost is relatively low compared to the quality of stability given to the pistol for shooting. The stock is easy to install in lieu of the OEM grip panels - only a common flat blade screwdriver is required. The stability provided by the addition of the stock is much better than that of a two-handed hold while bracing against a solid structure for precision shooting.

Offer the stock with the pistols as part of a value-added kit. Include a thin rubber pad or sleeve to improve the shouldering and contact stability of the stock, particularly for snap-shooting with a red-dot sight.

I've been through a gamut of air pistols and rifles over the years. This is the best combination (with optional steel receiver for mounting an optical sight) of both worlds.

this stock also fits the Crosman 2240 CO2 & .22 , Caliber with no problems

Fits perfectly on my Crosman 1377c pump pistol! I can have get better shots cause of the better stability from having a stock on my gun. Makes the gun look cooler too!

Maybe add a rubber pad at the end the hard plastic can dig into your shoulder kinda hehe maybe im just holding it too tight?

Excellent shoulder stock if you want to turn your Crosman 1377c into rifle but with out the long nose barrell this is a must adds better stability to each shot and better accuracy! Throw in a scope you'll see a difference! :)

my 3rd one - a necessity for 1377c

price

add steel breech and you will start scoring- scope makes it better. leapers offset mount will allow long air rifle scopes (barska preffered)

Higher quality plastic than the original grips. Feels more solid. Definitely improves accuracy, but I could have got that by using a rest as well instead of shooting the factory version off hand. Best if you add a scope, even a cheap one. Now my accuracy is great to 25 yards and should be a good enough combo of power and accuracy for squirrels and starlings.

I would have made the stock a bit longer. Also, here's a crazy idea, how about a custom FOLDING stock?!? Ok, that's just the geek in me.

In my opinion, the shoulder stock also makes it easier to pump!

Made my 1377 much more steady than as a pistol.

Offer a matching forstock in the deal. That would make the price much more fair.

It completely changed the personality of my 1377. I couldn't hit before, but now I'm consistantly getting great grouping on the range. Outdoors I'm taking out small birds with a head shot at 15 to 20 yards with the peep sight.

works and fits perfect on a 1377 model made very well

nothing

if you want your hand gun to feel like a carbine this is for you..

simple, mounts snug, worth the money, and comfortable

Nothing

goes great with the 1377 and 2240 i dried it on. fit perfect on both guns and is comfortable

It got rid of my slipping grip problem, and it's light, sturdy, and makes even coffee hands stable on my 1377. Easier cocking, rock steady hold. Looks good, and makes a laser, or red dot not look as out of place like it did with standard grips.

I would ship the thing UPRIGHT so it doesn't warp in the UPS truck like mine did!

I LIKE IT ALOT! If you get one that's warped just use warm/hot water and bend it back. I liked mine with the right angle bend, and will keep it that way. Just worked out for me, other wise mild hot water will take care of it. As I figured, another customer did that, and fixed it perfectly.BOX states it will also fit 2240 model. Great for one handed shooting!

Everything about this stock is good. It even makes pumping easier as you can grab the stock instead of just the pistol grip.

Nothing

This adds versatility to your 1377. Two guns in one, Pistol and Carbine. It doesn't get any better than that. Every 1377 owner should have one.

Everything fit, finish, look, feel... everything!

make a fore grip out of the same material so you don't have this then that crappy wannabe wood.

This is the first of many mods so be prepared... I started with this and now have an 18 inch .22 cal barrel with a cusom muzzle break and a long steel breech with red dot sights. Looking for the perfect trigger and spring now.

great addition to my 2240 and 1377.. fits nice and tight.

maybe make it have an ajustable butt plate. and for models with wood looking grips maybe a wood looking stock.

i have the crosman 2240 and 1377 and only 1 shoulder stock.. i really should of boughten 2. 1 for each gun instead of changing it gun to gun.

The finish, construction and design are excelent, Crossman do a good job!

Nothing, the stock it's good as is!

I use this for a mod on my Benjamin HB17, the Crosman 1377 and the Benjamin HB looks similar but they are not, and the stock dont fit perfect on the Benjamin, but still I was able to make it work after add some epoxic and drilling and painting (I was working on a big mod so that was included on the master plan from the start)...

This stock is so sweet on my 1377. Improved my acuuracy and looks great. Good quality and value. Very confortable with scope use.

Crosman needs to offer a matching black forearm as well.

You won't be disappointed...

Price, style, fit and finish. I used this stock for my Crossman 1377. I also painted the forearm grip black, prior to receiving the shoulder stock. Boy I'm glad I did. Now it looks totally unique, it does not have that fake wood look any longer. I used a matte black color. Aside from the looks of the shoulder stock it actually improved my accuracy.

Absolutey nothing.

By painting the forearm stock of the Crossman 1377 and adding this great shoulder stock makes for one great Classic turn into a modern marvel. PyramydAir really goes above and beyond in the shipping dept. Excellent.

The price and ease of installation. Rugged, high-impact plastic is very weather resistant. Light weight.

Nothing. Maybe also make a cheek piece to attach to the top for scope use?

This will also install on the 2240 and 2300 series of Crosman CO2 guns, turning them into sweet little carbines like the 2500 (minus the forestock). Works absolutely great with my 2300KT (the .22 version of the 2300T from the Crosman Custom Shop). When my stock arrived (ordered with the gun) it was warped about 1/2" to the right, but I was able to straighten it out by soaking it in a roasting pan of boiling water on the stove for about 5 minutes and then gently pressing it against the tile edge of the kitchen counter until the bend was removed. I plan to make a zippered pouch to mount in the hole in the stock to hold extra pellet tins and CO2 cartridges and maybe a cleaning kit . This would be very handy on trips afield. I also wish they'd make one for the Benjamin HB22 and EB22 air pistols.

quality plastic, I wish the grips alone were offered as an additional upgrade over the two piece factory originals

length of pull (distance from trigger to butt pad) is too long for scope use. OK for open/dot sights. I can understand this as Crosman had to figure open sights, maybe offer one with a LOP of 13"-14" for scope users

A good upgrade, allows for a very steady aim and looks fine. LOP is greater than any "normal" long gun I have, 13 1/2" to 14 1/2" for rifle or shotguns the LOP of this stock is 16" , making it hard to get a full field of view through my scope, for you longer necked folks should be fine, though :)