Page 2 - Hawke 1" Rings, Weaver, Low Reviews

Four screws to hold scope in place on both rings the special tape grips your scope without having to over tightend the eight srews on rings

nothing

good quality and fit for your money

Four screws to hold scope in place on both rings the special tape grips your scope without having to over tightend the eight srews onrings

nothing

good quality and fit for your money

light weight and easy installation

Nothing

Other rings are heavier, so of you're looking to keep the weight down this is a good option.

Reasonably priced, solid mounts. While they cost a bit more, I like the Hawke rings a bit better than the UTG rings. They seem to work equally well, but the Hawke rings look a little nice in my opinion.

Nothing at this time.

I used these rings on a RWS 54 Air King with a UTG droop compensating mount. The height of the scope is perfect with these rings. Tried medium rings and the scope sat too high.

No protuberances to hang-up on guncase interiors, weeds and grass. Seems amply strong and not likely to strip threads or break bolts if tightened hard on hard-kicking magnum springers.

TORX fasteners instead of Allens.

Aluminum alloys are ALWAYS "suspect" as to stripping threads or fracturing... If they last a couple years w/o problem, you are pretty "safe" :-) (Have "spares"/back-ups, "just-in-case")("3=2...2=1....1=NONE") Davo

The way they look and they look very strong and not the type to slip. The four bolt hole top caps help insure this as well as the tape in the rings.

I would not change anything as they are quality mounts.

So far so good everything is fine.

Great looking rings.

Maybe make them in a medium height too.

Worked great in putting the Hawke 6-24 x 44 scope on my Savage B-Mag.

well built; secures easily.

Hmmm, nothing!

Work great with weaver mounts. Has 4 bolts per ring for added secureness.

High quality; excellent value; four screws per cap.

Nothing.

The Hawke one-inch rings have help my Hawke scope without shift on my .25 caliber Diana Model 52.

I used these rings on the Leapers/ UTG droop compensation base unit to mount 50mm scopes on a RWS-52 and the TX-200. The ringcaps have four screws per cap, and the scopes do not move.

These are some of the best rings I've used for heavy scopes on high recoil guns. So far, the scopes haven't moved.

Great fit & finish.

Price is a little on the high side.

This product goes very good with the Air Venturi Intermount system for Benji. rifles.

fit well, heavy duty,nice finish

cross bolt screw is too long and sticks out the other side instead of flush.

Low Low Low - , just the way I like it

I would have changed the ring cap design - I like the B-Square design and fit to scope tube better than this design , but these work and hold just as they are.

used this on my RWS 460 with the :UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum, the result was a perfectly placed 50mm scope - the UTG mount was bulky but these rings compensated for the height for a flawless fit

High quality rings. The rings fit a picatinny base perfectly. By virtue of the lateral screw resting in the base slot, recoil creep is eliminated. The tape inside the rings does seem to help clamp the scope against movement.

Would like to find even lower rings.

Low rings are plenty high enough for an RWS 48 with the UTG picatinny base.

Good solid bite. I love the inner grip tape. It really holds the scope from shifting. Great 4 screw holding ability. These are very solid and work well with the UTG base I bought them for. They are nice and low which works well with the UTG base and are hard to find. So far absolutely no movement on an RWS 52 which says something.

Maybe make them out of steel but that would at least double the price.