Page 2 - Leapers Accushot 1-Pc Bi-directional Offset Reviews

Very nice quality, i attached it to a gun with a lot of recoil and it made the scope hold its zero.

Nothing.

Love life and life will love you back. Its not the gun, its the shooter.

I bought this to get a compact scope closer to my eye on a Crosman 2289 with a steel breech. It worked exactly as I needed it to. It's a heavy duty, quality mount and clamps onto the breech tightly, and is small enough to not look over-sized on the gun, but big enough for a bigger gun and scope.

Use thumbscrews rather than Allen heads for the base screws.

Inside distance between the rings could be tight with a bigger scope.

CSR suggested this: Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail; however, it was too low profile for the scope I purchased (Leapers UTG 3-9x40 AO True Hunter). The size of the scope was a surprise when I opened the box. The "one stop pin" mounting option eliminated the ability to rotate the scope bell. I had an extra Offset mount - my favorite mount for .22 rifles - and luckily this had two stop pins that matched up perfectly with the locations on my TX200 HC. I mounted it - took it the range - and dialed everything in after 3 shots - and no creep or problems after shooting for 2 hours. It's a keeper! I've got three of them in use on various rifles (air and rimfire).

I like this mount - that's why I had an extra on hand. I set it up, and forget about the mount.

I put up a picture of my TX200 HC with the scope mounted. If you want more pics, holler.

Well made, has screw stops to keep it from moving around because of recoil.A good choice from other mounts that cost twice as much but do the same thing. Cant go wrong , great value.

Nothing

Very easy to mount and adjust also looks cool. Used this mount on my tech force model 66 ( looks like a qb57) to bring the scope height more up to eye level and move the scope back further. Very happy with purchase.

I liked the cost and the strong one piece constrution.

This product wold be great for a junior shooter or a rifle with a really long scope on it, because it will move the scope 38mm closer or further away.

High quality mount. Used this to put a Leapers scope on my Daisy 953, works perfectly and looks cool.

Has two option/location to engage its scope stop on gun receiver

Nothing

Well made and worth the investment

Low price, high quality, excellent value for your dollars.

Nothing. I have installed these mounts on air rifles and .223s without failure.

I installed the Leapers Accushot one-piece Bi-directional Offset Mount on a Walther Competition Ultra .177 rifle. After 500 shots, neither the scope nor the mount has shifted. The Leapers Accushot mount is a high quality product. Leaper products have earned my trust because I have not experienced failure with Leaper products (including scopes).

Perfect for the IZH-60/61 and Bug Buster scope, it's like they were made for each other! Nicely adjustable for just the right eye relief. Nicely made too.

Nothing

Made for the bug buster scope give perfect eye relief

This is an excellent and solid mount for the money. When used with a 40mm scope it was too high and resulted in the POI being too low on the HW50s.

Solid mounting for my red dot sight, and gets it back far enough to have the best eye relief for me. It elevates the scope far enough to allow me to load a pellet even with my big fingers.

Nothing, love it.

Just turn it around if your scope is too close.

Tough well machined solid mount! Great mount at a great price!

nothing

Looks & price

Re-design for clearance

The new design Bugbusters will NOT fit on these without filing or milling. The turret housing of the scope sits flush on the base and you cannot rotate the scope to align the reticle to the bore.

very convenient, solid

nothing

great for izh 61, 513 and other guns with weird scope configurations

Great Quality and comes with different scope lock screws to fit many guns.

Nothing, it works good with the Baikal MP161 because of it's small dovetail rail.

Not the standard scope mount, only use it if your gun requires something different froma more straight forward mount.

Liked this offset mount well enough I bought another! Used to mount a Millet Red Dot sight on a pistol, it can be mounted on a dovetail of only 2 1/2 inches yet affix a sight 5 1/2 inches long. The rings also have four locking screws not one or two. Can be mounted in either direction depending on the eye relief preferred.

Nothing.

Used with a drop of blue loctite I have this mounted on a Diana 5G springer and it's rock solid.

Great mount, Very stable. Brings the scope back enough to be comfortable on my Walther Talon Magnum. It locks everything down tight and doesn't get loose from firing a high power springer like 2 piece mounts do

nothing

Perfect fit for the 'bug buster scope' in my RWS 11mm dovetail. Solid fit.

nothing. pleased!

Very helpful design for the springer guns. This also brings the scope much closer to your eye.Check the design of your scope. The bottom side of the scope could touch the top of the mount so as the rings would bind up and not tighten down.

Rock Solid mount being a GREAT value when you need the rigidity of a ONE PIECE / OFFSET optics mounting.

Depth of relief between ring saddles is a bit shallow making mounting of some scopes with large turret mechanics around scopes main tube contacting mount requiring machining of mount in this area for more clearance.

Said it ....