Page 7 - Leapers Accushot 1-Pc Mount w/1" Reviews

Very solid. Easy to install. Holds the scope well without over clamping.

Not a thing!

I see no need to pay more for a scope mount. This is installed on my Gamo Big Cat and does its job without a flaw. It handles the recoil and holds the scope solid.

Great scope mount for the price. Rings have 2 pairs of fasteners on each ring vs 1 pair like some others which are better for even pressure on the scope. Also has a stop pin (set screw) for the rear.

Make it 4 screws on the dovetail/11mm rail attachment instead of 3.

Excellent mount for the money. I use Leapers mounts on all my rifles, even firearms.

Nothing.

I was always a Steel only mount guy until I tried these Aluminum models. They really perform and nothing on the market can beat them for the price.

Easy to mount, solid and sturdy after over 1000 pellets. Excellent value! Spare parts appreciated, but not yet needed! Scopestop seems to hold up well on my 1000ft/sec rifle!

4 screws on mounting rail would create a longer base for larger scopes. The connection to the rifle would be 25% stronger, but so far everything seems fine, besides that my variable scope has a "forward look" due to the short base!

Throw away those cheap 2pc-mounts and get one of the accushots! Technically I would've given 5 stars!!!

Solid mount. Locks down very well

4 allen heads to the rail mount... if 3 is good 4 must be better :-)

Make sure you have the correct mount for the objective lens to clear the scope

Rock solid mount for a great price.

I can't think of anything I would change.

This mount solved the problem of the scope mount moving on the rifle, but there is a new version of mounts for RWS rifles that also solves the problem and addresses the Diana rifles "droop" at the same time. I had to shim the rear ring and move the stop pin in front of the dovetail on the rifle for this one to work. Having said that, the rifle now shoots quarter inch groups at 20 yd. and under a half inch at 35 yd.

Today I'd buy the new Leapers mount specifically made for RWS Diana rifles which does not require shims or mounting in front of the dovetail.

securely holds scope against the heavy recoil of my magnum rifle. great mount for the price

nothing

found 1 piece mounts considerably more durable than double rings with higher powered rifles

All the Allen wrenches are there in the package. Easy to install.

Very nice mount at a nice price. Anchored the scope on my CF-X . Everything lined up great.

Heavy duty, sturdy mount with all the wrenches you need. No stripped screws, and I really torqued it!

Maybe remove the sticky tape, and it stayed on my scope when I removed the top rings for scope changeout. Gave it a 4 for the sticky tape.

Lots of scope mount for little money.

Good solid sturdy mount, serious screws, comes with decent Allen wrenches, fair price, clear & simple mounting instructions

nothing

I mounted this on my mystery gun (a used Daisy Model #1000 in Gamo box) with a BSA 2-7 scope. I experienced no difficlty at all with the set up and I am no mechanical wiz. From now on I will not buy combo packages like my RWS 34 Panther those mounts were useless junk and the scope not so good either.

Good quality, function, and appearance.

Nothing, for my application (Gamo-Big Cat 1200).

If you buy a scope (40mm +) with "flip covers", get the high profile version of this mount to assure proper clearance. I had to exchange mine.

This is a very solid, sturdy mount at a great price, I've put more then 200 rounds down range since I put this mount on and have had 0 issue with scope movement. Great product! It even comes with a spare stop pin which is nice

Honestly nothing. its a great mount, very sturdy and clearly built well

Holds tight and affordable.

Nothing.

Fits 11mm rails.

Very solid construction. Reversible clamp that allows fit to a wide range of scope rails. Great value for the price.

The scope stop pin hole on my Crosman Tac 77 Elite is somewhat far back and this mount isn't very long. So, to give enough eye relief, I had to situate the scope all the way towards the front such that the adjustment dials are almost right up against the forward scope ring. Perhaps if the mount were a centimeter or two longer.

This will fit 11mm and other dovetails as well as 3/8". You may need to take out the mounting screws and flip the clamp over to fit different rail sizes. The stop pin is pretty thick and I can't see shearing that off unless you have a massive super magnum spring gun or it wasn't mounted right.

very sturdy, well made and machined, nice finish, very strong, grips like my sons hand on a cookie, no slipage at all, easy to install.

make rear of mount adjustable for elevation for ease of sighting in RWS guns, they need excess down elevation adjustment to sight in.

only mount you'll need for most apps. very strong. worth the money.

In my opinion this is the closest thing to perfection there is. The stop fit perfect to stop ALL movement in the scope. The scope ring that came with the RWS kept coming loose every third or fourth shot. With this one I have been able to shoot almost same hole groups of five at ten yards.

Make sure that ALL future customers had the option of going with the more expensive RWS scope ring or the inexpensive one that works every time with out any problems.

MORE EXPENSIVE DON'T ALWAYS MAKE IT BETTER!

I liked the tape inside the rings

This thing needs a stronger scope stop for high recoil guns

This comes with 2 scope stops..the gun I installed it on was a Daisy 1000s and it completely sheared both stops right off, making the mount ineffective. I now have a Remington Summit that comes with a single piece mount and I have no complaints with it whatsoever. The stop pin on it is much thicker and is sharpened to a point, giving it extra sturdiness, unlike the thin and brittle pin like this one.

Very stable and strong mount, and a great mount for the money.

Not one thing

The staff at Pyramyd were great and a real help. Thanks Ladies

I had problems with my new RWS 460 like every one else with the scope mount that came with it. I have not had a single problem with this new mount. I am so thankful that i did not have to spend a lot of money to correct the problem that so many of us worry about. If you own the new RWS 460 this is the cure. This mount even came with 3 extra screws and allen wrenches. The very high quality and bigger screws that will not strip out like the factory ones are a Big Plus. I will order more of these for my other guns. THIS IS THE ANSWER TO THE RWS 460 SCOPE MOUNT PROBLEM.

Nothing

This scope mount has hung on to over (4,000) four thousand shots and is still as tight as it was the day I put it on. This is the answer to the RWS scope mount problem.