Page 2 - Leapers Accushot 1-Pc Mount w/1" Reviews

I purchased this mount when I bought a Beeman 1085 because it was a recommended by PA as a match. It fit perfectly, aligned squarely, and holds the scope (Swiss Arms 3-9x40 - Swiss Arms 3-9x40 Scope with... ) securely. I am extremely satisfied not just with this item, but with how well if fits with the entire system. PA did good making this a recommended upgrade for my airgun.

This is drop-in upgrade and no changes are needed!

A quality mount at a cheap price.

Nothing.

Bought this for a cheap Gamo Whisper gas spring rifle which works well for squirrel duty in a residential back yard. It came with a lousy scope and 2 rings. Wife bought a Hawk Airmax scope for it, which is awesome, but I knew it should be mounted with something better. Off went the crappy 4x32 and on went the new 3x9x40 with this mount and a little blue loctite. Now a great setup. Someday when that rifle dies I will have a good scope and mount ready for the next rifle.

stop pin, good value

add another bolt to dovetail mount for security

Holds a Hawke 1X25 Red Dot rock solid on a Hat .30 cal model 135 QE w/ Air Ram filled to 165 bar at 40 fpe w/ 50g JSB. Much recoil. Sure worth the $

I blue loc tited the scope stop screw. Ive had one back out before. I just did it for preventive measures. 1800 shot or so. Good to go

If your scope tends to get knocked back via front ring, then this mount probably will help. It's a good value. I use these with a Hawke scope on three rifles. .257 Texan .457 Texan .50/510 Texan (true .50, not a .498 bore)

I can't think of anything.

I'm using Hawke optics, or 1970s Redfield. They are nice optics for my budget. These rings help alot to manage and keep optic where it should be. Pyramydair.com does a good job. I have to order by phone. Ronda, Greg, and Doug always help me order, and they are very helpful. Good Job.

Real easy mount on Benjamin Discovery. Intuitive, in minutes.

Nothing

Ideal for good clearance for loading.

Economic. Sturdy. Holds up to recoil of .30cal Hat 135 filled to 160bar for under 20 bucks...beat that.

Using this on Hat 135 .30 cal filled to 160bar. Holding a Hawke Red Dot. The 2 piece mnts kept moving. This one stays in place. Hasnt budged 1000 cycles. 160bar=much recoil. It holds. This Hawke Red Dot is very light. If i was using a heavy scope i would probably be using the 4 bolt model. Having said that. I do use the off set version of this that only has 2 bolts w/ a compact scope on a tuned up Hat 135 in .25 cal and it dont move ither. I am using the scope stop screw though. And i went ahead and put blue lock tite on it. I had one back out once and had to take scope off and all that mess then re-zero. Best to go ahead and use it 1st. I dont use loc tite on any other screws, just the little scope stop screw.

Very good quality product. Fits the 11 mm dovetail exactly.

Nothing.

Really good price for the quality. Will order more if needed.

Easy to mount and very secure.

This was recommended to my Pyramyd Air to mount a Hawke Airmax to my Beeman R9. It works perfectly.

machined well, great choice especially considering the price!

no improvements necessary

Very sturdy with solid screws.

Nothing for the price

Very good buy for the price

GREAT PRODUCT

NOTHING

GUYS! This mount is a MUST for spring or gas piston air rifles. My Benjamin titan np was gathering dust and I thought it was a waste of time and money because it grouped like a cheap shotgun now I'm taking head shots with confidence.LEAPERS has made a superior product and the price is right, I highly recommend this mount and Pyramid Air

Instant shipping and make it free. lol now really, price is fair and quality is great

Night and day difference buy with confidence

Strong, precise, well machined one - piece mount usable on any favorite air rifle. I have it on an HW 97 .20 Cal K-T and no slipping.

Nothing. It's well constructed.

It can fit any air rifle with dovetail scope grooves.

I was having trouble with single ring mounts rattling loose after just a couple of shot, this mount curved the problem. It has a full solid rail with 3 screws that holds tight. I've had 0 problems since putting it on.

Nothing

When mounting, just snug the screws and then tighten the center one first.

easy to install, rock solid

I wouldn't change anything about this scope mount

Its well made, and comes with allen wrenches and extra screws. Feels solid and looks good. No complaints about the product as it is. Sadly does not work for my application but not the fault of the mount.

Nothing really other than maybe a pro airgun version which has pivot rear and slotted front ring to elevate to pre-compensate for longer ranges.

Have to take into mind the length of your scope and how it will mount. For my application (QB-78 rifle, Leopold VX-2 3-9x50 scope) the scope height was good but will not go forward enough for proper eye relief. Being a 1 piece base your limited to where it can sit if you have an open breech airgun.

Bought a UTG scope, the 2 piece mounts that came with it allowed the forward mount to move due to recoil, switched over to this 1 piece mount, ground the little nub off the set screw that connects to the receiver so more mass connected in that area, blue loc tited everything, put the forward ring just shy of the objective bell, all systems go, scope has not moved since

Include loc tite with the mount

Very easy to mount on the rifle. This went on a Beeman Dual caliber. It is very hard on the recoil, but this unit seems to handle it fine

good as is

I always put a drop of super glue on the threads for the scope mounts. Never had a problem with a scope coming loose

Goes on rifle rock solid.great mount for the money

Nothing