Page 3 - Leapers Accushot 1-Pc Mount w/30mm Reviews

great mount

would like to see a version that is a bit longer for bigger scopes

solid mount,well built.

Simple to mount. Extra screws. Stop pin. Allen keys included. I used this to mount a Hawke 4-15x50 on a TX200 and it is solid as a rock. About 1500 pellets through rifle and it has not budged a millimeter. Awesome mount for the money.

Literally nothing.

This is a quality one piece scope mount at a great price

I would like four bolts to lock the mount to the dove tail

Cant beat it for the price. Single rail eliminates movement. Being a high mount makes it easier for me to get into that scope eye.

pre dip lock tight on all the fasteners.

This mount is absolutely the most bang for the buck you can get, for a one piece mount. I use them primarily on break barrel pellet guns and they also work great on my Ruger 10/22.

I would not change but one thing. I would add two extra mounting screws between the three that it has now.

I drilled and tapped this mount and added two extra mounting screws. I get zero movement in the mount of any kind. This gives a solid zero on the gun and there is no need for a scope stop, to keep locked down to the rail. Thanks, Sparky

Excellent one piece mount. Strong enough for magnum air rifles, even without using the scope stop.

I have several of these in different heights. Every one is great

Reasonably priced. Solid mount. Installation is super easy. Has held my scope solid as a rock without any screws loosening and absolutely zero change in impact for more than 1000 shots on my beeman 97.

Wish all scope stops were the same so mounts could incorporate larger pin that had a positive screw in place method of mounting. Make the mount a little longer so there is more space between the rings. My HAWKE scope has such a large turret area it leaves very little room for adjustment forward or back.

Spend more if ya want but unless your rifle scope combination has special mounting issues you are just wasting money you could have spent on 2000 or so pellets.

One piece mount used as recommendation of PA. Solid mount Fits scope as intended. Stop pin.

Had to shim scope rings on a TX 200 with no barrel droop. Very difficult to sight in under those circumstances

Very little forward and back adjustment to set eye relief

Good solid construction,recoil stop,shorter front to back,perfect for the Leapers mini swat i got it for.

nothing really.

just a good solid scope mount,killer deal for the money.

Fit is very good on my talonss22. Used this mount with Leapers 3-12x44 compact swat scope. This combination is scarry acurate out to 50+ yrds.

Pretty solid mount so far...

I used these scope High mounts on my Cometa Fusion with my Leapers 2x12x44 Leapers SWAT Scope. MUCH easier field of veiw after raising the scope from the medium rise scope mounts. Hasn't shifted at all.

Maybe add the fourth cross bolt on the dovetail mount, but hasn't shifted yet.

Raising the scope makes for a more comfortable shooting position. I can stay on target much longer with my head up and neck straighter now.

Price and build quality. This thing is solid metal and very well engineered. I'm still trying to figure out why other brands have to cost so much more.

Complete wish-list territory here: Maybe include some lock-tite with the package? Anyone interested in this mount likely needs lock-tite to keep screws from working loose.

This is an excellent investment if you shoot a spring piston airgun. The one piece mount really helps lock down your optic and control that secondary recoil.

Excellent price, very sturdy, gets the job done with a minimum of fuss. I have a TX200 MKIII and a TX200 HC, both use this mount with Leapers 6-24 x 56 scopes.

NOTHING

I have tried other combinations of mounts and scopes. So far this combo works for me. LEAPERS AND UTG PRODUCTS gets the job done without breaking you wallet. Ever had to replace a scope and claim warranty???? Try them. They already have a replacement with your name on it.

Easy to install since they are one piece mounts.

Nothing!

These mounts work great on my 30mm Leapers scope. It is mounted on a Ruger Air Hawk. I haven't had any issues with the scope slipping using this mount.

Well made and nicely finished. Solid dovetail rail. Quality recessed hex steel screws.

Nothing. Possibly offer a model with extended base of 120mm and 4 base rail screws, especially for 30mm scopes. Gap between rings of only 57mm limits linear adjustability of scopes with large turret hubs.

Excellent one piece mount. Removes and replaces well without adjustment or resighting. Stop pin prevents movement of the base on magnum springers but top cap screws need to be fairly tight to keep a heavy scope from jacking in the rings. High profile mount will accommodate objective bell size of 56mm and possibly up to 60mm, depending upon receiver and barrel configuration.

Very well made @ a very attractive price. I don't see why anyone would buy another brand @ 2 to 3 times the price os this mount. Rock solid.

Nothing.....

Beats eveyone else in the mount business. EXCELLENT!! Fit and finish are great, cost ...are you kidding!! Pay $60.00 and you won't get any more. Holds firm to my TX200.

Nothing

Don't be fooled by more expensive mounts.

This is the mount that was recommended by the Pyramid Air folks for the Leapers SWAT scope they installed & is a high quality scope mount for my Air Arms TX200. It is very reasonably priced & its good looks enhances the appearance of my precision air rifle.

Not sure I would change anything...

Offers a very secure & solid platform for your scope & although I've fired several hundred rounds, NOT one of the mounting machine screws became loose. This is especially crucial to maintain the precise accuracy of your magnum powered spring air rifle!

Simplicity and strength. I mounted a Leaper's 4-16x50 scope on this mount. It took me half an hour and I was shooting. It has been on my Whisper for over a month and it hasn't budged. Totally satisfied.

Can't think of a thing

Make sure you get the correct height mount for your rifle. you do not want to 'top' out your adjustment on scope.

Solid mount and does not get any square than this when mounted. This is way better than the two piece mounts on any springer. I have tried a few and went back to this affordable one piece solid as can be mount.PERIOD.

nothing

Mount it loosely and push down on the half rings while gently tightening the clamping screws until snug. Adjust the pin stop and observe the movment and carefull not to move the rear part of the mount. Then tighten the clamping screw and retighten the pin stop snug to get a firm hold on the stop groove. Mount the scope and zero it. Yes that simple.