Page 14 - Leapers Accushot 1" Rings, High Reviews

Price, quality, design, larger mounting screws on base clamps hold solid to scope rail.

Nothing.

Attention Discovery owners! I used these on my new Discovery and I'm glad I went with the high profile rings because I didn't have to remove the rear fixed sight to accomodate the 32mm lense size of the Leapers 3X9 Golden Image scope I mounted on it. Beware, the package deals only give you the medium profile rings which may result in a conflict between the front scope housing and the rear fixed sights if you're mounting the scope on a Discovery air gun. If I had ordered a 50mm objective scope or tried to use medium rings I would have had to remove the sights. Longer scopes may avoid this situation altogether, but better be safe than sorry.

Good and strong well made, you can control clamping pressure better then with a one piece mount. Which is important on a HW or Beeman gun.

nothing

I use these on all my Beeman/HW AG's they work well and hold tight with over clamping the stop pin hold's everything in place.

Great quality and great price. They stay where you put them, so scope stays zeroed. These are very good rings for the price.

Nothing right now.

These high rings work great on Benjamin Discovery with a 40 mm scope. Do not get the see through rings , because they are useless with the 40mm scope installed.

Excellent quality !

nothing

you can't get better rings for the price ....in fact i tryed to find high mount airgun rings all around Chicago for a week and could'nt find them .....thankfuly there's Pyramyd Air !

everything!

for this price range you cant find close to this scope ring's. this will do the job for a strong recoil. for me two piece looks better than one piece!

everything

nothing

Good buy can't go wrong.

Best rings for the money. You will never ever need any stronger. They are bullet proof, install easy, and look great, too. I will use them anytime I need rings for my guns.

Nothing

Keep several pairs on hand for projects. Get the medium, high, etc.

These are the best rings for the money that you'll ever find. Look no further !! Well made, with a nice finish.

Nothing.

Get 'em while they're hot !!!!

These are a perfect fit for the Bugbuster scope on my Airforce PCP

Nothing

Very solid mount for the short bodied scopes

Excellent product! You will not be disappointed if you purchase them. For the price it is the best kept secret. Furthermore, these are the SAME EXACT RINGS that Beeman sells for 4 times the price. I compared them with a set of the "Beeman rings" and there was NO difference. Great product and they mount easily.

Nothing. They work as designed and stay tight.

Anyone who uses a scope should read this: please use a small amount of "loc-tite" on the threads of your scope mounting threadd to prevent the mount from loosening up from the repeated recoil of the rifle (springers). I have never had a problem with these mounts. I recently purchased another 3 sets of the "high" mounts for several more of my rifles. GOOD PRODUCT.

Very tough rings. They don't move. Two Screws for both sides on top and two screws on the bottom. Very durbable.

Nothing

Built very nice for the price. Very easy to install on my Gamo Wisper VH

Nothing

When I ordered my bug buster scope I told Pyramyd air what gun I was installing it on and they ignored my comments and sent me the scope with the wrong mount. So I had to order the wright one and wait another week.

Great rings, I have 4-5 sets of these on different shooters, can't beat the value for the price.

The tape on the inside of the rings is great in keeping scope rings off of your scope and also in securing the scope, problem is that when you decide to use a different scope, or use the same scope on a different set of mounts the tape tends to get gummy and you have to clean it off. A little WD-40 will break down the adhesive on the tape, and then will wipe off with a little rubbing alcohol, so it's not really a huge issue and having the tape is better than the slight amont of work you need to clean it off later....I'd prefer a slightly different tape, but can live with what is there, just a bit of a hassle to clean off.

You wont get a better set of mounts in this price range and I've bought a bunch of different brands including some that cost 3 times as much or more.

Accushot rings are the only rings I use for my airguns. I find them to be very strong, solid rings. I have them in one inch and 30mm with no complaints or problems of any kind.

Not one thing !

These are as good a rings as I have ever used on airguns and rimfire guns. I have bought a few sets of what I considered very expensive rings and have not found them to any better than the Leapers Accushot Rings.

used the high ones on a gamo cfx,used 2 metal shims on rear,works perfect. no problem loading breech on a bsa 3-12 x 50 ao.

nothing

use neversieze on all screws-makes it easier to remove if you take it off a few times-no stripping threads.

Very well built. I mounted a Bugbuster on my Beeman P17 with these in order for it to clear the open sights. Worked great. I had a pair of $25 mounts on it that I bought from a local gun shop and these mounts at less than half the price are far superior in build and quality

Nothing.

These are very robust and well built. They come with all the wenches needed for installation and extra screws.

I like the double sets of screws in all locations. They seem sturdy and well built.

The screw heads could be a little harder. I haven't stripped them out or anything but they seem a little soft.

Make sure you use some blue loctite on the threads. I've had very good luck doing this.

Easy to mount. Works well with larger objective scopes. Product is of good quality, price is excellent!!

Adjustability would be the only improvement left.

Some air rifles and scopes really could benefit from a higher mount and these will usually be the answer without breaking the bank!! Nicely built. Recommended product.

Looks, inside tape to prevent scratching

Nothing, I love my set and will be getting more

If using a springer, I only recommend the B-square 1 piece rings and mount. Every other ring I tried moved. I am using these on a PCP..., so, for a pump up (pneumatic) PCP or other non or low recoiling gun. These are great for what I use them for- accessories and my PCP's. Also great for accessories such as lights, etc.

Everything, a great product.

Nothing