Page 3 - UTG 11mm-to-Weaver Adapter, Vertical Scope Reviews

Perfect for my High Shock (Nitro) air rifle. Weaver mount clamped securely and Stop-Pin keeps mount in place. Picattiny rail w/ thru-bolt scope rings ensured no creep.

A couple more notches longer, but imagine you have that in other rails you have available.

Same ol' "ammo" pickyness. Stay w/ the pellet used for sighting-in.

This adapter lets me use my old Tasco Pro-Point red dot sights on air rifles without having to change the rings that are on the sights.

I would not remove the metal from under the forward part of the adapter. This part of the adapter looks like it is weak , and might bend or break .

Price

Nothing at all.

This is what you need for mounting optics on your air gun. Great little adapter.

Many air guns use 11mm for sight mounting, but most "red dot" sights are equipped to fit the Weaver system. This adapter is the perfect solution to this problem.

No changes needed.

Buy this, you'll like it

Good looking solid mount.

Self centering would be nice but it is well worth the price.

I use one to mount a bipod on an Airforce Condor and bought the other to mount a scope.

Easy to attach to rifle. It was exactly what I was looking for.

This adapter is well made and does it's stated job.

Nothing.

This adapter had mixed reviews, but was recommended to me by the PA staff. I'm glad it was recommended. I used it to mount a BSA red dot sight on my Beeman dual caliber air rifle and it does a good job. Don't believe the negative reviews.

It makes moving scopes from gun to gun very easy. Once set up, positioning the scope in the exact same location is a no brainer.

Nothing

This is a great addition to any rimfire or air rifle. It allows the shooter mount a scope at more than one position and affords the ability of moving the scope further away or nearer the eye as necessary to obtain proper sight picture.

Maybe make the picatinny rail a little longer.

Very moderately priced, and shipping is reasonable. It will get here much sooner than getting one from Hong Kong or China.

I got this to mount a red/green dot instead of a scope. My Beeman does have iron sights.I like that is adapts to something i could use. and it is accurate ( it has a 3 inch drop but I know that is normal)

nothing really . Maybe a little longer mounting surface at the base.

Well made and stays tight.Very reasonable price

nothing

Works great with UTG red/green dot optic. Mounted on Benjamin trail np pistol.

i did a review on this the day i bought it, and just totally trashed it. what i didn't realize, is that you can easily fix the scope problem by using low profile or medium profile rings instead of high. im buying a pair of low rise weaver rings, to use with my leapers 3-9x40 AO scope, hopefully it will work great. i like that it has a stop pin in it, because my utg "max strength" rings i had on my dovetail mount didn't have them, and over about a year's time, they were slipping off with every shot, and i couldn't hold a zero. hopefully with the new rings im getting, i can hold zero and get some squirrels before the end of the season. i didn't get a single squirrel this season due to the scope problem

i would like it the actual base that attaches to the gun went the whole length, as i am scare the scope may make it sag some.

DON'T USE HIGH PROFILE RINGS!!!!!!!!! even with the elevation maxed out, i was shooting about 6-7 inches low. make sure you use low or medium profile rings.

works great for me. I need and adapter for my Beeman and to be able to put my red dot on it.

nothing is does what it was made for.

You might need to reset your scope for the added height but, it will not be that much resetting it.

What can you say - it is a mount adapter. It fits the gun and has a plastic stop pin to keep it from sliding on the gun. Comes with an extra stop pin and clamp screw. Includes the hex wrench too - which is pretty standard with most mounts & adapters.

Nothing.

Used to mount an UTG 3-9x32 AO Compact CQB Bug Buster Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Medium Max Strength Lever Lock Weaver Rings to an IZH 60. I had to slightly modify the bolt stop block on the IZH 60 so the adapter would not block the loading port. The mod was easy as the part on the IZH 60 is plastic - took 5 minutes with a scroll saw blade and file. Adapter grips the receiver tight and there is no evidence of creep. The scope mounts fit nicely, grip well, and are easy to attach / remove. Adds 3/8 inch to the scope height.

I love this thing locks down tight scope never moves

Nothing

Price, quality, Price, fit and finish, price, IT WORKS PERFECT!

Nothing besides bought more..

I got a couple of them.. One for a .25 Condor SS to mount a bi pod to, works great! Another to adapt a Yanger 909s to weaver scope mounts and bring the scope up to clear the factory sights, works great!

This is a great product for the price fit perfectly on my crossman tr77 and allowed a perfect fit for my leapers/utg 3x9x40 scope.

nothing.

Very well made and it works as advertised.

nothing

If you need a 11mm to weaver/picatinny adapter at a reasonable price,this is the one.

It fits more secure on a dovetail than dovetail rings can because of the longer clamping area. It is quite well made for the price.

nothing

This is a good solid mount for a hunting gun that might get bumped around a bit.

Great for the M Rod pistol and something to throw into your next order just to have to try out cheapy red dots or your buddys scope with weaver rings.

none

Not a heavyweight mount and my springer shook it loose pretty easily.