Page 3 - UTG Scope Mount Base, Fits Reviews

Very solid. Integrated stop in the front is nice. Screws feel very strong without the feeling that they're going to strip out when getting tightened down.

Maybe 4 screws instead of 3 on the clamp.

This mount compensates for 17" of barrel drop. It was way too much on my RWS 54. I installed it with a brand new Leapers 3-12x44 SWAT scope and I needed to shim under the scope on the front scope mount.

Believe it or not I modified this mount and put it on my Air Force 177 Condor. I didn't like the way my stock Condor was set up, (The scope used 50-75% of it's elevation sighted it in at 30 yards.) I milled off the front portion of the mount ( the part containing the"moon shaped" circle) and mounted it on my Condor. Now my scope is nearley set at zero at 30 yards and is just as accurate as it was before. Now I have more adjustment to play with if needed.

UTG should come out with a universal scope mount like this one, to fit all air rifles.

If you don't have access to a milling machine get a good file and file off just the " moon shaped circle" enough to clear your dove tail mount. After I milled the end I used flat black paint to cover up the milled area, it looks like no mods were made.

Greatt base solid as a rock

not a thing

Must have for RWS 52

Sturdy reliable design.

I bought the mount with Leapers low Weaver rings but if I had to do it over would buy even lower rings because its more comfortable for me to lean foward down into the scope when aiming but you can still get used to it.Will still change to some different rings I found that will drop scope considerably closer to the Weaver rail

Very easy to install, sturdy, looks good, perfect fit for an RWS Diana 54.

Make it a trifle lighter if possible.

This adapter is essential to compensate for the notorious barrel droop of most Diana air rifles. Use the LOW weaver rings for any scope up to an objective size of 44 mm. If your scope is bigger than that, or if you plan to use the objective lens sunshade, use the Medium rings.

Very well made! Very practical and sturdy. Perfect for Diana products.

Nothing!

Read the instructions before mounting to gun.

Easy to install. Works like described

Make longer

Long scopes may not allow rings to be equally spaced on scope and hit slots on mount.

Very tough and simple.

Reduce the height and make a set of matching low rings.

There is no windage adjustment on the base, I got lucky and didn't need it but not everyone will. Great mount for the RWS 54.

Solid and true

torx heads instead of hex for the mounting screws

Perfect for my RWS 54. The C Kit I had failed miserably and damaged my scope and mounting hardware.

Very easy to install , Very well made !

absolutely nothing !

I bought this for my model 48 after trying adjustable mounts and it's just awsome ! Solid as a rock and easy as you please to install ....and only $17.50 !! It's a bargain ! I combined this mount base with UTG Weaver scope mounts and it's made me fall in love with my model 48 all over again ! Wonderful product !!

design

nothing

used it on a 460 worked well.may try the one with no droop becuase i found i diidnt need that much on my set up.

This mount is built like a tank once it's in place and tightened down it's not going to shift at all.

Nothing

The RWS Mod. 48,52,54 and 460 are really tuff on mounts and scopes. I've used lots of different mounts in the past on several of these airguns, In my personal experience you can't go wrong with this mount. it locks againt the fron of the grooved base on the RWS airguns so it's cannot shift backwards and it also has a threaded set screw that can be screwed down into a recess machined into the dovetail mount on these model RWS airguns which stops movement of the scopemount in ANY direction. It compensates for the droop built into these guns and with the scope I used on my rifle I was able to get the zeroed in with the scope set just a few clicks above it's mechanical center leaving plenty of upward adjustment for those really long shots. If you own one of these airguns and your mounting a scope on it take a serious look at this mount first.

This is a very solid mount base , a great choice for high power springers.

nothing

Fits perfect on my RWS model 52. Buy 4 bolts rings to go with it.

The base fits easily and is no trouble to mount. Directions are clear and concise. The extra front lift makes it the best mount for long range shooting with a scoped RWS 460 Mag.

Nothing.

Don't overtighten the screws. There is really no need for cranking them down too hard anyway. I have not had time to shoot beyond 28 yards yet, but I expect the extra lift in the front of this mount will make setting the scope up for 50 and 100 yards very easy to do.

Price point, solidly built, excellent design, correct angle milled into the mount to compensate for the rainbow trajectory of air rifles, good value.

Diana should strike a deal with Leapers to include this mount with every rifle they sell, in place of what they try and pass off as a scpoe mount.

Get this mount. If you try to use the mount that comes with these rifles you will regret it.

Awesome on my model 52 in .22 caliber. That rifle DESTROYED 2 other mounts including the RWS "c" mount that was useless on this gun. Simple to install.

nothing.

Get really solid 2-bolt rings.

This is a necessary fix for Diana's shift problem. Good job Leapers.

Needs to be a similar mount without the angle compensation.

Adds a professional, almost tactical look to the rifle. Most importantly, stops scope creep as advertised, forever!

Nothing. Might seem pricey at first, but what price can you put on confidence in every shot?

This mount was suggested to me by pyramid, after I told them I owned the model 34. When questioned, their response was "I know what I'm talking about", and I've gotta say, they sure do! Great work guys, I'm very happy I followed the advice.

This product is what was needed for a long time,I bought two of them and I like the ease of installation and best of all" a solution to the RWS exsisting RWS mounting system I recommend it highly.

Nothing This is the best for the RWS air rifles bar none

It is just the best

This mount is solid as a rock. Finally, a mount that will not shift on a powerful RWS DIana springer. I have bought two other mounts and they both shifted. This one stays were you mount it.

Very little. Maybe a scope stop on both ends that fits tight on both ends.

This is the mount you have been looking for and it is cheap as dirt.