See other products by Air Venturi > Tech Force
Ballistic & Conversion Calcs
See other products by Air Venturi > Tech Force
Ballistic & Conversion Calcs
Max Velocity | 1100 fps |
Overall Length | 46.1" |
Buttplate | Rubber |
Function | Single-shot |
Weight | 7.72 lbs |
Scopeable | 11mm dovetail |
Safety | Automatic |
Suggested for | Small game hunting/plinking |
Caliber | .177 (4.5mm) |
Loudness | 3-Medium |
Barrel Length | 17.9" |
Shot Capacity | 1 |
Barrel | Rifled |
Front Sight | Fiber Optic |
Rear Sight | Fiber Optic |
Trigger | Two-stage adjustable |
Action | Break barrel |
Powerplant | Spring-piston |
Body Type | Rifle |
Create an online review
3.0 3.0
4.0 4.0
4.0 4.0
The power, stock and sights*. The stock is good, solid, and nicely checkered. I have an asterisk on the sights because, while they are pretty good, the rear sight is a bit cheaply made. It is adjustable for elevation and windage, but part of it is just a bit loose, although it is loose in a way that does not affect its usage. On another part of it, I had to use locktite liberally on the mounting screw and sight-to-barrel contact surfaces initially, to ensure it stayed where I wanted it when first sighting it in.
Things I would have changed:The scope stop, the trigger, and part of the sights. The gun has some things to note: first off, the scope mount stop is laughable. The receiver is dovetail grooved, but there is no stop hole drilled into it. The stop clamps to the dovetail just like the mount itself would! The stop also has a screw that goes straight down through the middle that apparently is to be driven into the top of the receiver, but with no hole for it to go into, what's the point? However, my other air rifles are all scoped, and since I only intend to use open sights on this gun, it is not an issue for me. The trigger could use some help. It isn't bad, but it isn't great either - the safety is not as positive as I'd like, and there is a little side play in the trigger. But, what do you want for $260? And, as I mentioned above, I'd improve the quality of the rear sight. The design seems fine, it just needs to be better executed in actual production.
What others should know:Let me start by saying that I knew I was taking a chance on this rifle because it is made in China. (Nitro-pistion upgrade is Crosman, of course.) I had a few basic requirements for this gun. It's primary purpose is for dispatching rabbits who invade my wife's vegetable garden. Secondarily I use it for backyard plinking fun. So, I wanted a .22 cal, nitro-piston, wood stock gun with ample power and open sights that wouldn't cost too much. This was one of the few rifles available that fit the bill. I learned after ordering it that the nitro-piston upgrade for this gun was brand new, and the folks at Pyramid Air wanted to be sure it was right before shipping. For that reason, the expected arrival date came and went with no gun, but when I called to inquire about it, they explained they were making sure it was right before sending it. Once they got it right, they sent it overnight air at no additional cost to me, so I give them kudos for that. I'd rather have it right and late than on time but not working well, and they did get it right - it has functioned well and I've probably got 300 or so rounds through it now. Power and accuracy are fine. I adjusted the sights for the JSB Exact Jumbo Monster pellets I am using. The gun pushes them easily and they hit hard. I should be taking my first rabbit with it very soon. Overall I'm satisfied with it for the price.
Got a question or answer?
Log in to participate
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By William
5.0 5.0
4.0 4.0
5.0 5.0
I have the .22 version, and it is really accurate! Getting 1/2" groups at 30 yards; with 30 yard zero, using 14.3 grain C.hollow points, rounds drop only 2.1" at 60 yards, and have a spread of 1.75"! Great penetration at long range. Rifle is pretty quiet. Glad it "likes" the inexpensive pellets. Scoped with a BSA 3x12x44 AO; seems perfect for this rifle; fit and finish are top notch. You will not be disappointed with this one.
Things I would have changed:Have a scope combo for this price
What others should know:Only problem that i have encountered is that it does not want to cock on the first time; sometime i have had to recock it in order for it to lock up; My question to all you airgunners: Could this be caused by over lubing at the factory? It is so accurate that I can live with the several cocking attempts; does anyone have a remedy for this without it having to be sent back? Any info would be appreciated